Hydrogen Peroxide Low Temperature Plasma Sterilization equipment
USD $18,800 - $21,800 /Piece
Min.Order:1 Piece
Hydrogen Peroxide Low Temperature Plasma Sterilization equipment
Model: HS-PP60, HS-PP90, HS-PP130
Available Volume: 90 liters, 130 liters
Hydrogen Peroxide Low Temperature Plasma Sterilization equipment Instructions and Principle:
Short time cost, which is a high efficient sterilizer;
The sterilization medium will be decomposed into water and oxygen, which is safe and environmental;
Extend the service time, low cose sterilizer; With the humanization design, intelligent operation;
High-efficient sterilizing, which ensure the SAL10-6 level sterilizing result; Accurate injection system, complete detection system;
Easy to installation.
1. Improve the ability of dealing with the emergency surgical operation need.
2. Decrease the difficulty of the management for the surgical equipment and apparatus.
3. Improve the efficiency of the operation room work.
4. Raise the level of practical cooperation with the other clinical operation department.
5. With the stepper motor accurately controlled, hand-clamping-prevention design.
6. All the spare parts are all from world famous brand to ensure the quality.
7. The unique atomization system and the dry filter system will obviously decrease the usage of H202, protect the pump oil from emulsifying, which will extend the service life of the unit.
8. Self compensation plasma power supply, with nice sterilizing result, no special smell after sterilization, and also no H202 remains.
9. Conform to the human body engineering and classic pleased appearance design, the surface is with electrostatic plastics-sprayed, wear well and easy to clean.
Hydrogen Peroxide Low Temperature Plasma Sterilization equipment Specifictions and User Manual:
MODEL | HS-PP130 | HS-PP90 | HS-PP60 |
Chamber | 130L(Horizontal) | 90L(Horizontal) | 60L(Rectangle) |
Max. input power | ≤ 3.0 KW | ≤ 2.8 KW | ≤ 2.6 KW |
Peroxide generator power | 1000 KW | 500 KW | |
Max. Vacuum rate | ≤ 60 Pa | ||
Sterilizing cycles | Single cycle, Standard cycle, Enhanced cycle | ||
Time for single cycle | 25 min | 22 min | 20 min |
Time for standard cycle | 45 min | 43 min | 41 min |
Time for enhanced cycle | 65 min | 62 min | 60 min |
Hydrogen inspection amount | 2.8 ml/once | 2 ml/once | 1.5 ml/once |
Concentration of H2O2 | 58% | ||
Working temperature | 35-55°C | ||
Power supply | AC220V 50HZ | ||
Screen type | 5.7" STN full color, touch screen | ||
Printer | Thermal micro printer | ||
Data record and research | Constant record and research |