1575mm 8-10T/D Double-dryer and double-mold kraft paper machine
1. Raw material: Recycled Paper, Old Corrugation Box
2. Output paper: corrugated paper
3. Output weight: 80-140GSM
4. Net paper width:1575mm(1600mm)
5. Wire width:1950mm
6. Rail guage:2400mm
7. Design speed: 100m/min
8. Work speed: 40-80m/min
9. Capacity:5-8T/D
10. Driving type: use AC frequency conversion,and driving by step
11. Machine design: squaring box type, including left and right hand machine, high speed running in safe and safety environment.
12. Dryer: Wire-releasing part: ≥18-24%
Squeezing-mill releasing part: ≥38-40%
Manufactured paper dryness: 90-92%
13. Calculated running speed in a day: 22.5 hours
14. Calculated outputting rate: 97%
15. Calculated finished product rate: 95%
16. Layout type: Mobile back part —— double cylinder moulds part ——pressing part ——2 Φ1500mm dryers——paper winding machine ( right hand machine)
Technical design: Pulping, paper making and processing equipment adopt one-stop process design. This advanced design occupies small space for convenient operation and management. It has high security and automatization degree, and can provide you high production with steady quality.
Second: requirement for the water,electricity, air and vapor
Requirement for the electrical source:
High voltage: AC10000V±10%
Low voltage: AC380V 220V±10%
Frequency: 50HZ±1%
Operated with compressed air:
Dielectric pressure: (aire supply)0.6-0.7Mpa
The highest temerature: 35°C
Quality: need filtrating
Working air pressure: above 0.6Mpa
Compressed air for the meter:
Dielectric pressure: 0.5-0.6Mpa
The highest temerature: 35°C
Quality: filtrated, unoiled and arefaction
Working air pressure: above 0.5Mpa
Branch water and primary water: clear and colorless water without sand, neutral PH scale.
Vapor:
working pressure: 0.3-0.4Mpa
Testing pressure: 0.8Mpa