Corrugated paper machine
Technical Parameter
1. Raw material: Waste Paper, Old Corrugation Box
2. Output paper: corrugated paper,package paper
3.Output weight: 100-300GSM
4. Net paper width:1760mm
5. Wire width:2150mm
6. Rail guage:2600mm
7. Design speed: 110m/min
8. Work speed: 60-90m/min
9. Capacity:20T/D
10. Pressure type: pneumatic pressure device
11. Driving type: use AC frequency conversion,and driving by step
12. Pulp formation type: pressure mould former
Pulping and paper recycling:
The process of waste paper recycling involves mixing used paper with water and chemicals to break it down. It is then chopped up and heated, which breaks it down further into strands of cellulose, a type of organic plant material; this resulting mixture is called pulp, or slurry. It is strained through screens, which remove any glue or plastic that may still be in the mixture then cleaned, de-inked, bleached, and mixed with water. Then it can be made into new recycled paper.
Machine Structure:
1.Cylinder part:4 stainlesssteel cylinder(Φ1500mm×2150mm).4 couch rollΦ500mm×2150mm, 1 reverse roll,Φ500mm×2150mm. rubber hardness HS380±2. attached with 4 pressure mould
former(made of polyethylene board).
2.Pressing part: 2 Natural marble roller(Φ650mm×2150mm),2 rubber roll(Φ600mm×2150mm). rubber hardness HS-90°±2, Pneumatic compression device.
3.Prepressing part: 1 Natural marble roller(Φ500mm×2150mm).1 rubber roll(Φ450mm×2150mm). rubber hardness HS-90°±2, Pneumatic compression device.
4.Dryer part: 1 alloy drying cylinder (Φ2500mm×2150mm), 6 alloy drying cylinder (Φ1500
mm×2150mm),arrangement:1+6. 2 anti-roll(Φ750mm×2150mm).rubber hardness HS-90°±2,Pneumatic compression device.multi cylinder equipped with net wire devices.
5.winding part: 1760mm cylinder winding paper machine and rewinding machine.
6.Driving and controlling part: using of AC frequency conversion, and driving by step.
Features:
Controlling way: Adopt Siemens or Sanken inverter and high quality low voltage apparatus.
The main core hardware supporting
every branch transmission point goes with a AC Inverter, indicator lamp, air switch, terminal board and so on; these all sino-foreigh joint products.
Transmiss control cabinet
All adopt standard GGD control cabinet, including power supply cabinet, transmission cabinet.
Operational panel
Including main transmission operational panel.
Software and design information:
1. PLC applications software, speed chain, current control and telecom software.
2. Providing system schematic manual, external wiring diagram and cable list.
3. Providing technical specification of system unit, operation, running and configuration software.