Product Details

peristaltic pump

Place of Origin Hunan, China
Brand Name peristaltic pump
Model Number LC
Theory Centrifugal Pump
Structure Single-stage Pump
Usage Water
Power Electric
Standard or Nonstandard Nonstandard
Fuel Other, Electric
Pressure Other, Both high pressure and low pressure
Application Other, Maritime, Sewage/water/oil and other chemicals

Product Features

peristaltic pump

Product Description

peristaltic pump

 

peristaltic pump

 

1.What is Credo LC Series pump?

LC series pump is a newly developed product with both homeland and overseas advanced experience in design and manufacture. LC series pump is used to deliver clear water, sewage with certain particles (such as iron scrap, sand, coal powder etc.) and industry waste water and sea water with corrosive. The temperature of liquid can not be above 80°C. LC pump is widely used in original water works, waste water factory, metallurgy and stell industry (especially suitable for delivering oxygenation iron sheet water in swirl pool), power station mine, civil project and farmland etc.

 

peristaltic pump

 

2.What is the Construction of  Credo LC Series pump ?

LC series pump is installed with single foundation, its inlet is vertical downward and outlet is horizontal. The pmp and the motor are directly connected. The rotation of pump rotor is counter clockwise looking from the motor to the pump.

 

3.What are the main features of Credo LC Series pump ?

 

1. LC series pump is fine designed with hydraulic design software. It makes impeller and other wearing parts have a long life because of anti-abrasive impeller and diffuser. LC series multistage vertical turbine pump is not only reliabole, safe, steady but also saving energy.

 

2. There is filter in pump inlet with proper hole, this can nor only prevent impurity entering pump to damage pump but also decrease inlet loss and increase pump effiency.

 

3. Impeller adopts balance hole to balance axial force. There is replaceable seal ring in front and back cover board of impeller to protect impeller and pump.

 

4. Pump middle shaft, water column and guard pipe are muti-burl, middle shaft uses technology of sleeve coupling. Water pipe can be more or less for different inundated depth according to user's requirement. Impeller and diffuser are multi-stage for different head.

 

5. Water pipe is connected by flange with guide bearing in its middle. Pump guide bearing adopts ethane or thordon bearing, it can also adopt rubber(whtn the temperature of liquid is over 55°C). Shaft is protected by guard column, the guide bearing should be supplied with exterior cooling lubricating water, while delivering sewage.

 

6. The remaining axial force of pump and the weight of rotor parts are borne by thrust bearing in motor seat or motor with thrust bearing. The thrust bearing is lubricated by dilute oil and cooled with exterior water. The thrust bearing can have element for monitoring temperature.

 

7. Pump shaft seal adopts packing seal, there is replaceable shaft sleeve in shaft seal and guide bearing to protect shaft and it is convenient to adjust axial location of impeller by nut in bearing parts upper end or pump coupling.

 

8. LC series pump can be equipped with controller which can automatically start and stop pump according to liquid level, give an alarm for over loading and control many pumps in long-distance. There is automatic exhaust system for pump with diameter over 500mm.

 

 

 

4.What is the Product Data of Credo LC Series pump ?

(1).Description of Credo LC Series pump

      Capacity Q:60~8400m3/h

      Head H: 12.5~94.5m

(2) Performance range

eg. 300LC2-50A

300—Outlet diameter of pump is 300mm

LC—Vertical long-shaft pump

2—Impeller stage number (No indication, whenstage number is 1)

50—The head is 50m at design point

A—Impeller diameter is cut

 

peristaltic pump

 

 

Packaging & Shipping

  Polywood case, as per customers requirement// 30-35 days after payment

Our Services

  peristaltic pump

Company Information

peristaltic pump

Material list

   Service Fluid

Material

Clear Water

Sewage

Seawater

 

IV

 

Part Name

 

Inlet

HT250

HT250

HT250Ni2Cr

ZG00Cr17Ni14Mo2

 

Impeller

HT250

ZG1Cr13Ni1,

ZG1Cr18Ni9

ZG00Cr17Ni14Mo2

ZG00Cr17Ni14Mo2

 

Diffuser

HT250

QT500-7

HT250Ni2Cr

ZG00Cr17Ni14Mo2

 

Water Column

Q235-A

Q235-A

HT250Ni2Cr

ZG00Cr17Ni14Mo2

 

Discharge Elbow

Q235-A

Q235-A

HT250Ni2Cr

ZG00Cr17Ni14Mo2

 

Guard Column

Q235-A

Q235-A

1Cr18Ni9

00Cr17Ni14Mo2

 

Shaft

45/2Cr13

45/2Cr13

1Cr18Ni9

1Cr18Ni9

 

Shaft Sleeve

2Cr13

2Cr13

1Cr17Ni2

1Cr17Ni2

 

Guide Bearing

Filling in Ethane or Thordon

 

Guide Bearing Body

HT250

HT250

HT250Ni2Cr

ZG00Cr17Ni14Mo2

 

Sealing Ring

HT250

2Cr13

HT250Ni2Cr

ZG00Cr17Ni14Mo2

 

Adapter Coupling

45/2Cr13

45/2Cr13

1Cr17Ni2

1Cr17Ni2

 

Coupling

HT250

HT250

HT250

HT250

 

Motor Support

Q235-A

Q235-A

Q235-A

Q235-A

 

 

 

You May Like

Find Similar Products By Category

You May Like

View More
Chat Now Contact Now