a.Applicable materials:

Solid: waste plastics, waste rubber class of various products.
Liquid: waste oil. Such as: waste diesel oil, waste oil and waste wash oil attachments.

Semi-solid: residual oil, under-bin diesel flow such as half a waste oil

b. The cooling system: spray + damping type cooling tank

c. the main characteristics:

1. Automatic continuous horizontal rotation.
2. high degree of mechanization operation.
3. to adapt to the raw material widely
4. the strong atomized dust removal desulfurization + vortex dust removal, smoke and dust treatment in line with the advanced countries environmental requirements.
5. after a secondary catalytic thermal cracking, then filtering processing, product quality improve a class, can be directly as a commodity to sell.
6. high temperature spray evaporation, the cold soak, the biggest advantage covers an area of less, easy cleaning, cooling effect is good, usually don't need to water cooling tower.

d.Innovate

1. unit of a complete set of production process is running in the smokeless tasteless environment, it has excellent safety and environmental protection.

2. using new energy research center of the latest technology, the cracking and oil gathering system, producing fuel oil, oil products are of good quality, yield efficiency advantages.

3. in the design of its key device which processor, thoroughly overcome the domestic current vertical cracking with flat bottom of local heating uneven, easy to fracture, low yield, short service life and so on unfavorable factors, the host structure of horizontal rotate 360 degrees, 0.4 r/min.

4. have rapid practical feeding and slag system.
5. efficient gas heating system. In the process of refining, after when the heated gas reaches 150 ℃, can produce a large amount of atmospheric pressure cannot be liquefied gas, methane to butane. These gases within our specially designed gas nozzle after sufficient combustion, produce large amounts of energy, greatly save the energy.

6. the new energy research center of the latest technology, can continuous uninterrupted production.
7. using new energy research center of the latest technology, the cracking and oil gathering system, producing fuel oil, oil products are of good quality, yield efficiency advantages.

e.Technological process:

First, two or three workers put the waste tyre by feeding door into the host reactor, feeding the door closed, seal. And then start the fire, in the heating chamber fuel coal or wood heating furnace. When the temperature reached 150 ℃, there will be a part of the gas evolution (at this time most of the gas exhaust), temperature of 220 ℃, the oil and gas separation, enter the atmolysis bag, residual oil (contains some slag) sinks to slag tank, and light oil will automatically enter the water cooling system, cooling, liquid. Into the light oil tank. In this way, can get heavy oil and light oil.
Through condensation, part cannot condensate gas, called the waste gas, waste gas, through a set of safety - water seal, (the effect of water seal is to avoid meet flame from the combustion chamber and exhaust gas explosion, return to the heating chamber as a fuel heating furnace. So, equipment operation at first, the fuel is coal or wood, as the temperature rose to 220 ℃ to 270 ℃, can the exhaust gas as a fuel. In general, fuel waste tires need is 60 kg per ton.
Ash handling: smoke came out from the main furnace and shell, into the flue condensation system, then enter the sulfur removal tower, the sulfur removal tower there are three steps: water, copper, stainless steel small nozzle (atomization, filter dust), will smoke filtration, purification, gas is more than 90% water vapor, no pollution.
The consumption of electricity: the whole equipment components are: power consumption induced draft fan (4-7.5 KW), speed reducer (3-5.5 KW), oil pump (1.5 KW) and (1.5 KW). There are 10 to 16 kw, so, the entire operating process, the power consumption is minimal.

f.Product's Technical Parameters: