Product Details

Product Description

Waste Plastic Recycling Machine for plastic and rubber raw material

Function of fuel from Waste Plastic Recycling Machine

: convert waste tire , rubber or plastic from citizen life and industry into oil, carbon black, steel wire or gas

Usage of the oil :

For the fuel oil , it can be used for boiler fuel , factory fuel oil , industry fuel oil .

For the final diesel oil, it can be used in truck engine , cargo ship , bus engine , farm machinery,

engineering machinery, or you can use the diesel oil to make electricity in the diesel engine generator.

Usage of the carbon black : using to make brick or briquette.

Usage of the steel wire : if raw material is tire, you will get steel wire , the steel wire will be sold to the steel or iron factory.

Usage of the gas : the gas will be recyceld to the furnace to heat the machine or collect into gas storage bag.

Different raw material oil rate that you can use in the waste plastic recycling machine

PE	50%-75%
PP	50%-75%
PS	50%-75%
ABS	40%
Leftovers of paper	Wet 15-20%, dry 60%
House garbage	35-50%
Plastic cable	80%
Plastic bag	50%
Submarine cable	75%
Rubber cable	35%
Sole	30%
Big tires	45-50%
Small tires	35-40%
PVC	Not available
PET	Not available

Waste plastic pyrolysis plant capacity and disposing time

Input	Capacity	Disposing time	Average oil quantity ( take tires as example)
waste tire waste plastic waste rubber	3 tons / batch	15 hours	1.4 tons oil / batch
	5 tons / batch	17 hours	2.25 tons oil / batch
	6 tons / batch	18 hours	2.7 tons oil / batch
	7 tons / batch	19 hours	3.15 tons oil / batch
	8 tons / batch	20 hours	3.6 tons oil / batch
	9 tons / batch	21 hours	4.05 tons oil / batch
	10 tons / batch	22 hours	4.5 tons oil / batch

Advantages of the waste plastic recycling machine

A) Safety
We treat safety as the first important thing in production.
1) Two devices to avoid backfire in production: oil-water separator and anti-back fire device.
2) Vacuum device makes reactor working under ordinary pressure or negative pressure.
3) Temperature monitoring device to avoid excessive working temperature.
4) Pressure gage to monitor the pressure. If it goes above a certain level, the bell will alarm and the safety valve will release the pressure automatically.
5) Carbon black is discharged in a closed situation to avoid catching fire.

b) Environmental protection
1) The flue gas (caused by burning fuel to heat the reactor) will be purified and cooled by dust removal device, then can be released into air through chimney.
2) The procedure to remove carbon black is working under closed situation to avoid pollution.

c) High oil yield
1. We have 3 steps for cooling system: one condenser pipe, two large horizontal condensers and two vertical condensers. The oil gas pass through 3 steps cooling system in sequence. The total cooling area is 65 square meter.
2. When the oil gas pass through the condensers, it’s divided into several portions by small pipes inside condenser and be cooled separately.
3. In this way we maximize the cooling effect and improve the oil yield.

D) High oil quality
The oil gas is purified by molecular sieve inside catalyst chamber so that the quality of oil is higher.

E) Energy saving
1) The flame path is designed as spiral so that the quantity of heat can be fully used.
2) The residual gas from pyrolysis is recycled to furnace burning to heating the reactor.
3) The insulation cover is formed by 3 levels: steel plate, rock wool and refractory cement. Excellent thermal insulation effect helps saving fuel.

F) High degree of automation
1) In manufacturing we use auto cutting machine, auto welding machine, auto rolling machine so that both quality and appearance of our products can be guaranteed.
2) In production, we use auto-feeder to feed raw materials into auto-feeder. By auto-feeder it needs few workers and less time to feed. And because of 50 ton hydraulic pressure from auto-feeder, it can feed more tires than labor.

G) Long service life
1) The material of reactor is Q345R boiler plate with 16/18mm thickness which is produced by Chinese well-known enterprise. The head of reactor and accessories are using one-piece molding shell cover rather than welded plate.
2) All cutting, rolling and welding works are finished by automatic machines.
3) We know quite well about the material quality and manufacturing process, that’s why we are confident in the service life of our products.

4) We also supply installation service, training service and one year warranty.

Features of waste plastic recycling oil machine

- instead of landfill or burning, pyrolysis is a green technology for waste management

- solve pollution problem caused by solid waste tires, scrap plastic or rubber

- recycle waste to renewable energy - oil resource

- raw materials - used tires, waste plastic are low cost, even get subsidy from government

- recycled products - fuel oil makes good profit