DC12v to DC60v Boost Module,5A
USD $4 - $8 /Piece
Min.Order:1 Piece
Shenzhen City Yason General Techonology Co., Ltd.
Input voltage :10-32V
Output voltage: adjustable (36-60V)
Output Current: 5A (MAX)
Input Current: 16A (MAX) (Please enhance heat dissipation than 10A,)
Output power: natural cooling 82W (MAX), enhance heat dissipation 120W (MAX)
Output Ripple: 2% (MAX) 20M-bandwidth
Operating temperature: Industrial grade (-40 ℃ to +85 ℃) (ambient temperature exceeds 40 degrees, lower power use, or to enhance heat dissipation)
Full load temperature rise: 45 ℃
Load Current: 25mA typical
Voltage regulation: ± 0.5%
Dynamic response speed: 5% 200uS
Short Circuit Protection: None (Please enter install fuse or protective circuit)
Input Reverse Polarity Protection: No, you can enter a series diode.
Wiring: free soldering terminals
Size specifications: 65 (L) * 47 (W) * 23.5 (H) mm
1 Less than 1 m wire length is not less than 1.5 square wire length if greater than 1 meter wire, bold, recommended 2.5 to 4 square line is better
2 module operates at high power, high temperature, plus the time, please install the fan housing, small power without adding a fan, be sure that the module heat sink temperature should not exceed 80 degrees.
3 Use the input can not be reversed output can not short-circuit.
4.12V battery discharge voltage can not be lower than 10.5V, Li-ion battery used in tandem (single 3.7V) discharge voltage can not be lower than 2.7V.
1.DIY an output adjustable vehicle power supply, only need access to your 12V power input, the output voltage can (35-60V) on freedom of continuous adjustment, but the output voltage can not be lower than the input voltage, oh.
2 boost charger, you can use the 12V battery charging 12V ??power supply is higher than, for example, 48V battery.
3 power for your electronic devices, as long as the voltage and current of the voltage regulator to your needs can not exceed the rated current is working properly.
4 solar battery charging for electric vehicles