Name: Separation machine Aluminum plastic tube separation machine/aluminum sawdust recycling machine
Brand: Doing
Availability: InStock

Product Details

Separation machine Aluminum plastic tube separation machine/aluminum sawdust recycling machine

Product Introduction of aluminum recycling machinery

Aluminum-plastic panel recycling equipment (aluninum-plastic panel separation and polyethylene-aluminum composite pipeline (PAP pipes) separation): This technology mainly used for recycling all kinds of PE-aluminum composite panels, PVC-aluminum composite panels, PAP pipes, aluminum-plastic bottle cap materials, car decorations, etc. Ans it also can be used for separating and recycling all kinds of eletric wires, cables and copper-plastic products. The main advantage of this machine is it can process big materials, which can be directly put into big crusher by grab crane. Then through second level crushing and three-level crushing to make the separation. The materials after separation can be dirctly classified to metal and plastic at once through the vibrating screen. This technology has low cost, high efficicency, and the recovery rate can reach to 99.8%. Also this technology adopt dry type separation, no need heating, burning, washing and checmical material, thus no pollution any more.

Feature of aluminum recycling machinery

1.) Physical methods was adopted ,to separate aluminum from plastic .
2.) No any pollution ,do not need water or any chemical reagent .
3.) High efficiency ,low consumption ,saving power consumption than traditional methods.
4.) Small occupied area ,machine is flexible to layout .
5.) High voltage electrostatic separator was adopted ,the metal and plastic can be separated completely .

Application of aluminum recycling machinery

Aluminum plastic recycling machinery applicable for all kinds of raw material such as: aluminum plastic composite panel (ACP) ,aluminum composite pipe , decorative mateiral , waste aluminum plastic windows ,waste aluminum foil ,medical blister , medicine wrapper , etc .

Working process of aluminum recycling machinery

When the waste aluminum foil, waste aluminum foil plastic was sent into the machine , they will use the aluminum separator to directly produce, aluminum foil and plastic can be completely separated. The recovery aluminum can be used to smelting the aluminum ingots and also are the upper materials.

Photo show of aluminum recycling machinery

Main Advantages of aluminum recycling machinery

♦ Environment friendly - Our auminum-plastic panel recycling equipment is a kind of environmental protection equipment, which improved the traditional fire burning and water washing methods which are not good for the environment. For our auminum-plastic panel recycling equipment , there are not waste water, waste smoke and dust pollution during the whole process.
♦ High automation - Our auminum-plastic panel recycling equipment adopt high automatic operation system, the whole production line only needs 1-2 workers to operate is ok.
♦ High recovery rate - Our auminum-plastic panel recycling equipment can be equipped with electrostatic separator, the copper recovery rate can reach to above 99.8%. Normally we can make no plastics in the metal and no metal in the plastics.
♦ Wide application - Our auminum-plastic panel recycling equipment can process all the metal and non-metal composite materials with certain size. Only need to adjust or change the equipment screen and the separation parts.

And it can directly separate very big material, like the entire aluminum-plastic panels or other panels with the wideth of 1.8m, thickness of 14mm and all kinds of metal-plastic lumps with the diameter no more than 1.8m.

♦ Durable in use - The crushers all use the hard and antiwear cutter, which is durable and long-lasting, thus to have a long usage life.
♦ Small land occupation and easy to install - Our auminum-plastic panel recycling equipment has compact structure which requires small land size. And it's easy for disassembly and installation with convenient maintenance. And it has many different kinds of assembly ways, which can fit in different sites.

Packaging & Shipping

Packaging & Shipping of aluminum recycling machinery

Our Services

DOING services for aluminum recycling machinery

♦ Pre-sale Service

(1) According to the customers' special requirements, provide the most suitable project design, process design and the purchase program.

(2) Guide customers to choose the best and economical plant, recover investment within short time, and site inspection.

♦ On sale service

(1) Welcome you to our factory for a visiting;

(2) Accompany you to check our machine production, quality and the working conditions.

(3) Customize the equipments strictly according to your special requirements and arrange the timely delivery.

♦ After-sale service

(1) Installation guidance

When the machine arrives at your company, we will dispatch our technicians to your factory to guide the installation and commissioning at site.

(2) Technical training

We provide free technical training service to your stuff. Training content contains the main work principle of machine, operating regulations, maintenance methods and steps, safety, etc.

(3) Warranty

Three guarantees of our product quality, warranty for one year (not include man-made damaged). We will maintain the machine for free for the quality problem. If the damage is caused by your improperly operation, the cost of the maintenance burden by you. we also provide you the life-long follow-up service.

Company Information

DOING Company for aluminum recycling machinery

We DOING Company as a leading manufacturer in China has specialized in all kinds of waste recycling machinery for about 10 years, 5 years experience for domestic market, and 5 years for foreign trading. We have developed and designed many kinds of waste processing machines, such as waste tire recycling machine, waste plastic recycling machine, waste oil recycling machine, waste copper wire recycling machine, waste aluminum-plastic panel recycling machine, waste PCB recycling machine, waste home appliances recycling machine, etc.

Through our constantly improved technology and services, we DOING Company has been accepted widely.

By now we have installed our machines in more than 30 countries:

Africa: Nigeria, Congo, Egypt, Uganda;
Europe: Romania, Poland, Italy, Macedonia, Albania, Turkey;
Asia: Malaysia, Pakistan, India, Thailand, Iran, Bangladesh, Lebanon, Jordan;
America: Mexico, Ecuador, Haiti, Guatamala, Aruba, Panama, Jamaica, etc.

And we have all the recycling machines installed in our factory which can be showed to you.

Except to provide you the best services and best machine quality, we can make you feel our profession everywhere. And we have all the machines installed in our factory. Welcome your visit!!!

FAQ

FAQ for aluminum recycling machinery

1. Are you manufacturer or trade compnay ?
We are the manufacturer, which have more than 10 years experience specialized in all kinds of waste recycling machinery.
2. Where is your factory ?
Our factory is locate in the industrial area, which only takes about one and half hour from Zhengzhou national airport to our factory. And we have the office very near to the airport which can pick you up directly from the airport to our office or factory. Welcome your visiting!!
3. How does your factory do regarding quality control ?
Quality is priority, since establishement, we keep strictly requirements about the quality with using X-Ray to test every section of the products, so we gain high praise from our customers ,all product have to pass strict inspection before they were sent out.
4. How about your after-service ?
We will provide one year free warranty for our machine, and after machine delivery, we have the engineers which can be sent to your site for machine installation, commissioning and traning your workers. You also can feel free to contact us, when you have any questions about our machine.
5. How long does will take you to delievery ?
A. In stock, within 15 days after received the advanced payment;
B. Out of stock, within 25 days after received the advanced payment.

Where are we?

Our office is in Zhengzhou City, Henan Province, which is in the middle of China and famous for manufactoring all kinds of machinery. From Zhengzhou International Airport to our office just need 30 minutes. Welcome you to our factory for a visiting!

Separation machine Aluminum plastic tube separation machine/aluminum sawdust recycling machine