high capacity oil press oil expeller price
USD $30,000 - $200,000 /Unit
Min.Order:1 Unit
OIL EXPELLER / OIL SCREW PRESS
Brief Outstanding Features
Cookers / Heating Kettles are used for proper heating and conditioning of the oil seeds prior to expelling.Controlled
heat and moisture open up the oil bearing cells for maximum oil yield.
Construction
These Cookers are all steel fabricated with steam heated jackets for each compartment. These jackets are suitably welded with studs and hydraulically tested before assembly. All compartments except the top one are provided with hinged doors for easy access.
Heating
Steam jackets are indirectly heated by steam and cookers are complete with necessary fittings i.e. valves, pressure gauges, relief valves, steam traps and thermometer. Bottom stage insulation of the Cookers avoids unnecessary heat losses. Insulation can be provided at extra cost.
Moisture Addition
Open steam spray is provided for bottom compartment of smaller cookers and for other sizes at the top and bottom compartments.
Control
Seed temperature, retention time in each stage, moisture content and depth are easily controlled.
Drive
The vertical shaft carries biparted agitators for each compartment and is driven from an independent electric motor through V-Belt and vertical cooled worm type speed reduction gear box.
Steam Consumption
Higher figures are for starting up and the lower figures are for steady running.
Dia x Ht.(mm) | No. ofCompartments | Total Heating area in Sq. M | Total volume Cu. M. | Steam Consump. Kg/hr. | Steam Pressure Kg/cm2 | Motorsmain drive H.P. | Exhaust FanMotor H.P. | Main Drive |
1676×2438 | 5 | 11.035 | 6.230 | 160 | 8 | 20 | 1.5 | V. Belt &Gear Box |