Specifications

1.Simple structure
2.low cost
3.easy to install and operate
4.virtually no maintenance

Working principle:
The ball mill is horizontal cylindrical rotation device, driven by brim gearwheel. There are two chambers and grid. Material goes into the first chamber through the feeding inlet. Inside the first chamber, there are stage liners and ripple liners as well as steel balls. The shell rotates so as to generate electricity, and this force brings ball to a certain height and then balls drop down by gravity, the impact is the grinding force to the material. After the primary grinding, materials go into the second chamber through segregate screen. In the second chamber, there are flat liners and steel ball, after the secondary grinding, material is discharged from the discharging. Then the whole grinding process end.

Model	Shell rotation speed(r/min)	Ball load(t)	Feeding size(mm)	Discharging size(mm)	Capacity	Motor power(kw)	Weight(t)
					(t/h)
900/1800	36-38	1.5	≤20	0.075-0.89	0.65-2	18.5	4.6
900/3000	36	2.7	≤20	0.075-0.89	1.1-3.5	22	5.6
1200/2400	36	3	≤25	0.075-0.6	1.5-4.8	30	12
1200/3000	36	3.5	≤25	0.074-0.4	1.6-5	37	12.8
1200/4500	32.4	5	≤25	0.074-0.4	1.6-5.8	55	13.8
1500/3000	29.7	7.5	≤25	0.074-0.4	2-5	75	15.6
1500/4500	27	11	≤25	0.074-0.4	3-6	110	21
1500/5700	28	12	≤25	0.074-0.4	3.5-6	130	24.7
1830/3000	25.4	11	≤25	0.074-0.4	4-10	130	28
1830/4500	25.4	15	≤25	0.074-0.4	4.5-12	155	32
1830/6400	24.1	21	≤25	0.074-0.4	6.5-15	210	34
1830/7000	24.1	23	≤25	0.074-0.4	7.5-17	245	36
2100/3000	23.7	15	≤25	0.074-0.4	6.5-36	155	34
2100/4500	23.7	24	≤25	0.074-0.4	8-43	245	42
2100/7000	23.7	26	≤25	0.074-0.4	8-48	280	50
2200/4500	21.5	27	≤2	0.074-0.4	9-45	280	48.5