Specifications

ShiCheng Oasis Mineral Equipment Manufacturing Co., LTD is produce Mineral Equipment / Ore Dressing Machinery86-13697077005

ShiCheng Oasis Mineral Equipment Manufacturing Co., LTD(0086-797-5745599

Shaking table

It is applicable for separations of fine-grained and micro-grained rare metal, ferrous and non-ferrous metal, precious metal, coal and other minerals. It can carry out ore concentration operation independently and also can operate in conjunction with jig, screw separator, centrifugal separator and other equipment. The product is made by the only manufacturer designated by the former Ministry of Geology and Mineral Resources, in compliance with the Industrial standards.

LY Shaking Table is to make separations based on the difference of specific gravity of feed materials, reciprocating asymmetrical movement and the stratification performance of the inclined table surface in the lateral water flow with obvious zone of the minerals with different specific gravities on the table, high quality of concentrates produced, convenient operation and adjustment and other features.

Shake surface structure of grit, sand, sludge of the points, there are 46 specific sub-slot, 60-slot dual-Qu Bo, 60-slot single-Qu Bo, 80 slots, 90 slots, 110 slot, 120 slot, lifting of bed, etc. materials were glass, steel or wood shaker surface.
The structure of the shaker are: a fixed bracket shaker without the mounting bracket, the installation required prior to pouring concrete and anchor bolts embedded a good, not easy to move, the cost is low; small channel shaker easy installation, simply pouring cement and embedded anchor bolts, affordable and easy to move; large channel Shaker (without pouring cement and embedded anchor bolts, installation fast and simple, easy to demolish mobile. suitable for sand, virtual land and ship operations.

 

Model	Uite	LY4500/1850	LY3000/1620	LY2100/1050
Bde Size	mm	4500/1850/1560	3000/1620/110	2100/1050/850
Stroke	mm	10-30	6-30	12-28
Times of stroke	/min	240-420	210-320	210-320
Slope	o	0-5	0-10	0-8
Feed  size	mm	2	2	2
	mm	0.074	0.1	0.074
Feed density	%	10-30	10-30	10-30
t/h	t/h	0.4-0.7	0.3-1.5	0.2-1
power	kw	1.1	1.1	1.1
Caparating size	t/h	0.5-1.8	0.7-1.5	0.4-0.8
	t/h	0.5-0.8	0.4-1	0.3-0.5
Overall dimensions	mm	5900/1850/800	4070/1320/780	3040/1050/1020
Weighe	kg	1350	700	420