Specifications

Electric infrared heater
1.Power:2000W
2.Heating area:15~20 M2
3.Technology:Anodicoxidation
4.Temperature:230-270 degrees

220V 2KW Electric infrared heater panel in room

 

Specification:

• Model:PF-NR20-11A
• Output power: 2000W
• Electric heater type: Infrared heater
• Heating element: carbon fiber
• Outer covering: Cold-rolled plate
• Surface material : Aluminium alloy
• Technology: Anodicoxidation
• Temperature: 230-270 degree
• Time up to 270 degrees in 3minutes
• Heating area: 15-20 M2
• Installation: celling;wall mounted
• Function: overheat protection;adjustable thermosta
• Use living room,bedroom,office,garden,factory, shop and so on
• Size: 1170*270*75 MM
• Weight:10KG
• Package:carton

 

 

INSTRUCTION METHOD

 

1. Product must be installed by professional installation personnel, and with national safety standards for electrical installation.
2. Rated voltage and power supply must use dedicated circuit, devices connected to the power outlet must have ground wire.
3. Determine the installation location of radiant heater, check the installation location can support four times of radiant heater weight, it should be reinforced before installation if can not support.
4. Choosing hanging rod bolts, fix 4pcs M8 screws on 4 positions of the bank radiant heater, as picture1.
5. Product can be installed on the ceiling/bracket or hanging installation. Be ensure that the space not less than requirements shown on picture2.
6. Please refer to wiring diagram.

 

 

 

 

 

 

 

 

 

 

 

Application:

• Factory and industrial places: warehouse and large depot
• Commercial spaces: stores and shopping malls
• Home: living room and bed room.