Specifications

1.High efficiency and quality
2.ISO9001:2008 and CE
3.Make log into chips
4.Long service and durable part

Introductions of disc wood chipper

   The series disc chippers produce a high-yield, uniform chip quality with low capital investment and low maintenance cost. It is available as a residual chipper or whole log chipper, mainly for round logs. Depending on the feed material, the chippers are available with vertical or slanted discs. The material is horizontally fed into the heavy disc which is equipped with knives. The cut is performed between the vertical rotor knives and the counter knives. The chips are discharged to below. For short feed material, the disc chipper is designed with a slanted feeding device.

   The design of this series disc chippers allows disc to be easily moved towards or away from the anvil, this provides a very tight set-up clearance between the knife and the anvil for producing excellent wood chips. The disc chippers are supplied with face-mounted knives and wedges for a damage-resistant, simple knife package.

 

Plain end feed (can add conveyor)

 

.

 

Declination feed(hand feed)

 

Use of disc wood chipper

By the processing, these feed-in materials are turned into high quality, uniform, and multi-application wood chips, which are ideal materials for the manufacture of particle board, MDF and paper pulp. The chips are also well suited as fuel for high intensity burning in modern heating plants.

Parameter of disc wood chipper

Model	600	800	1000	1400
Diameter of Cutter (mm)	600	800	1000	1400
Rotary Speed of Cutter (r/min)	970	740	740	650
Length of Wood Chip (mm)	2-50	2-50	2-50	2-50
Thickness (mm)	2-15	2-15	2-15	2-15
Way of Feeding	Declination	Declination	Declination	Declination
Feeding Size (mm)	220×240	250×250	350×380	380×400
Capacity (t/h)	1-3	3-5	4-7	5-9
Power (kw)	15	30-37	37-45	45-55
Maximum Diameter of Cutting Wood (mm)	240	250	380	400
Weight (kg)	1192	1680	2720	3300
Dimension (L*W*H)mm	2002×1175×1360	2008×1400×1492	2208×1600×1692	2208×1838×1850

Note: The above technical parameters are just for your reference.