BS-400 copper cable granulator machine separating machine 

1.Product introduce:

Automatic Copper Cable Granulator Machine is used for recycling Scrap Waste Cables Wires, this kind of machine can crushing cables into 3mm, 4mm, 5mm etc granules, and then separater the copper from plastic cover. Our cable granulator machine can reach 100% recycle rate.

BS-400 is a medium sized copper granulator machine, its capacity is about 150~200Kg/Hour. Also this model have a good production, it's convenient for to control and use. It's very cost-effective.

2.Technical Parameter:

3. How to use:

A:Youtu video

https://youtu.be/s4sdWnn14tM

https://youtu.be/HQplCMUtxpc

https://youtu.be/ll7vudTbMXQ

https://youtu.be/TBu_tgNX2Vk

B:Image show:

C.Working Flow Chart

Copper wire recycling machine is mainly used to make the double recycling use of metal and plastics from scrap wires. The copper wire recyling machine through crude crushing to extract the iron materials, then through fine crushing to separate the metal and plastic mixture. Since the plastic and metal granules are uniform, but the weight has big difference, they are easy to be separated by the gravity separator. But the plastics after separated by the gravity separator is not completely clean, may have about 2-5% small copper wre or powder. Then use the electrostatic separator can extract the rest and small copper wire or powder out to get pure plastic and copper metal. Thus to increase the recycle use value of the plastics and metals.

Mainly used for all kinds of scrap wires, copper wire, aluminium wire, such as automobile electric line, motorcycle electric line, storage battery electric line,waste household appliance disassembly electric line, electromechanical equipment,computer cable, telephone wire, cable TV line,communication cable and other scrap wires which are difficult to recycle, circuit board, copper-clad plate, etc.

D.OPERATION MANUAL:

For the first time using the device, please complete the following measures:

1) Before starting,the cleaning machine should be expected to
check the installation screen is normal, so no-load start.
2) Check the wire line is really well.
3) Turn on the butten.
4) Open the up suction fan button to observe the motor rotation right or wrong,if wrong,pls reset power supply wiring. 
5) After you have finished all the steps, you can start the machine. 

1)Outter Package: plywood case standard export carton.

2)Ship by express,air,via sea according to order quantity.