Carbide drawing dies of grade YL10.2 for drawing screwed steel wires
USD $60 - $90 /Kilogram
Min.Order:10 Kilograms
Zhuzhou Jinxin Cemented Carbide Co., Ltd.
Deep drawing die/ Tungsten Carbide punch press die/ carbide die mould
Finished Overpressure sintering tungsten carbide customized ring roller die forming
tungsten carbide sealing dies punch press die carbide die mould
Ring Roller Dies tungsten carbide wire drawing dies K20 K30 mould solid carbide rollers
tungsten carbide stamping dies head punch press die carbide die mould
Carbide drawing dies of grade YL10.2 for drawing screwed steel wires
Properties & applications of Carbide drawing dies of grade YL10.2 for drawing screwed steel wires
Grade | g/cm3 | TRS MPa | Hardness HRA | Performance & application recommended |
YG4C | 15.10 | 1800 | 90.0 | Mainly used as small buttons for percussion bits to cut soft and medium hard formations. |
YG6 | 14.95 | 1900 | 90.5 | For coring crowns, electric coal drill bits, coal cutting picks, oil cone bits and scraping knife bits, used in geological prospecting, coal mining and oil well boring. |
YG8 | 14.80 | 2200 | 89.5 | For coring crowns, electric coal drill bits, coal cutting picks, oil cone bits and scraping knife bits, used in geological prospecting, coal mining and oil well boring. |
YK05 | 14.95 | 2500 | 90.5 | Mostly used as the buttons of small and medium sized percussion bits and as the inserts of rotary prospecting bits to cut soft and medium hard formations. |
YG8C | 14.80 | 2400 | 88.5 | |
YK15 | 14.60 | 2450 | 87.6 | Suitable to strips, conical buttons for rotary percussion-resistant, geological prospection buttons, cut soft and medium hard formations. |
YK20 | 14.40 | 2500 | 86.8 | Primarily for the buttons and inserts of rotary percussion bits to cut medium-hard and hard formations. |
YK25 | 14.40 | 2550 | 87.2 | Primarily for the buttons and inserts of rotary percussion bits to cut medium-hard and very hard formations. |
YG11C | 14.40 | 2700 | 86.5 | Largely for the inserts and buttons of percussion bits and tricone bits to cut medium-hard, hard, and very hard formations. |
YG13C | 14.2 | 2850 | 86.0 | Primarily for the buttons of tricone bits and inserts of rotary percussion bits to cut hard and very hard formations. |
YG15C | 14.0 | 3000 | 85.5 | For oil cone drill bits, for medium soft and medium-hard rocks. |
Suitable for drawing screwed steel wires of diameter 4, 5, 6, 7, 8, etc. Or different types of steel wire and tubes. Surface finish of inner hole is over Details for drawing and specifications see below.
Nominal diameter number of screws.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
All dimensions in (mm) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Remarks: size of steel case can be decided by customers. |
The display of Carbide drawing dies of grade YL10.2 for drawing screwed steel wires
The packing of Carbide drawing dies of grade YL10.2 for drawing screwed steel wires
Zhuzhou Jinxin Cemented Carbide Co., Ltd specializes in manufacturing a series of Tungsten Carbide products.
Carbide Inserts for Mining Tools
Carbide Round Rods (dia from 1.0 to 25.4 mm)
Cabide for rock drilling tools and coal-mining tools
Carbide Tubes
Carbide strips and plates
Carbide tips for Debarking Bits
Enjoy your purchasing time.
lili
Skype:chinacarbidelili