Specifications

Sand Washing Equipment
1. Strictly quality control system
2. Advance technology
3. Perfect service after sale
4. With ISO

 

Sand Washing Equipment

 

ONE: Introduction and Application of Sand Washing Equipment:

1. Sand Washing Equipment is a kind of water washing equipment to be matched with the sand making machine.

 

2. This series XSD Sand Washing Equipment is a kind of water washing style equipment to be matched with the sand making machine and can reduce the dust and stone powder which mixes with the final sand, so sand making machine can improve the quality of the sand.

 

3. XSD series Sand washing equipment is used in building plant, quarry, concrete plant, dam building, casting-70 sand, glass factorys quartz sand and refilling pressure sand.

 

TWO: Working Principle of Sand Washing Equipment:

1. The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel.

 

2. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other.

 

3. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder.

 

4. Through the above process, the washing function is finished.

 

5. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder.

 

6. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used.

 

7. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.

 

THREE: Features of Sand Washing Equipment:

1. Simple structure. The bearing device of impeller drive is separated from water and materials with water, to avoid in a large degree that the bearings are damaged by being soaked with water, sand or some polluted things. 

2. Being used for cleaning sand in quarries, it has many advantages compared with traditional spiral sand washing machine: There is little loss for medium-sized and fine sand and stone powder. The grade and the fineness of the sand for construction after being washed can be up to the national standards, such as sand for construction and cobble and broken stones for construction. There are no other wear parts except the screen mesh. It has longer service life and lower maintenance frequency.

 

FOUR: Main Technical Parameter of Sand Washing Equipment:

Model	Impeller diameter(mm)	Impeller rotationg speed(r/min)	Capacity(t/h)	Feed size(mm)	Power(KW)	Weight(t)
XSD2212	2200	1-1.5	15-35	≤10	5.5	2
XSD2612	2600	1-1.5	20-25	≤10	5.5	2.68
XSD2812	2800	1-1.5	30-65	≤10	7.5	3
XSD3015	3000	1-1.5	50-80	≤10	11	3.4
XSD3215	3200	1-1.5	120-180	≤10	11	3.9
XSD3615	3600	1-1.5	80-120	≤10	15	4.5

 

FIVE: Pictures of Sand Washing Equipment:

 

SIX: Warranty of Sand Washing Equipment:

1. One Year (Calculated from the goods arrived the destination port.)  If any parts (excluding easily damaging parts) are found defective in quality in the first year, we shall replace it free-of-cost. After one year, parts can be replaced on favorable payment basis. We can send our engineer to provide the installation and trial run in your place. But the relevant cost shall be bear in your account (round trip air ticket, board and lodging).

 

2. Our professional service includes: Free training, Guidance Installation and Debugging. 

 

3. If you have any question, please contact us freely. Our after-sales service team on-line will do the best to accomplish your sincere requirement on time.