A hammer crusher, also called hammer mill, which is a machine used to shred orcrush materials into smaller pieces.The basic design of this type machinesinvolves a rotating shaft which free-swinging hammers are attached. Thisassembly is enclosed by a drum which carries the material to be pulverized. Ahopper is used to feed the source material into the drum. The hammers graduallycrush material until it is small enough to pass through a screen with openings inaccordance with the desired particle size.

Working principle 

Vertical hammer crusher  mainly consists of frame, rotor, support iron and grate bars. The frame is divided into two parts: Upper part and lower part which are welded by steel plates after being cut. Liners made of high manganese steels within the frame can be replaced after being worn out. The rotors consist of the turn plate, pin shafts, and hammers which are grouped regularly in the main shaft. The motor drives the rotors to rotate quickly in the crushing cavity, and hammers spread outward as a result of centrifugal force from the rotation of the rotors. Large materials entering the crusher through the feed inlet are stricken, impacted, cut and ground by the high-speed hammers to small size. Qualified materials crushed will be screened out and exit from the gap of the grate bars while the unqualified will be left in the crushing cavity to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the grate bars. The gap between the rotors and the grate bars can also be adjusted according to different requirement.

Features

1.Integration of feeder, belt conveyor, vibrating screen and crusher

2.Steerable traction axis makes road transit and place expanding convenient

3.Vehicular installation makes the plant in the working place easy

4.Integration of vehicular generating set, motors and control box

Specification and technical parameters