LDH75/100 PI-E high pressure vertical grout injection pump
USD $500 - $9,999 /Set
Min.Order:1 Set
Zhengzhou Lead Equipment Co., Ltd.
The LH75/100 PI-E high pressure vertical grouting pump is designed and made for permeation grouting, compaction grouting, backfilling grouting, curtain grouting, high pressure split grouting etc, grouting methods.
Grouting material: cement mixture, mortar/plaster, bentonite and other additive.
Specification of vertical grout injection pump
Item | LH75/100 PI-E grout pump |
Piston diameter | 100mm |
Piston stroke | 150mm |
Adjustable pressure ( low pressure) | 0-50Bar/725psi |
Adjustable flow rate( low pressure) | 0-75L/min |
Adjustable pressure ( high pressure) | 0-100Bar/1450psi |
Adjustable flow rate ( high pressure) | 0-40L/min |
Discharge pipe size: | M27x2 |
Inlet pipe size: | G2’’ |
Power Unit | 7.5kW |
Chassis | Skid |
Weight | 390Kg |
Overall Dimension | 1040x550x1650mm |
Note: Chassis: Skid or Tyre We also could according to your demands to customize |
Applications of vertical grout injection pump
Civil Engineering -dam foundations, tunnels, mining, soil nails, tiebacks, earth anchors, cable and rock bolts
Structural – building and bridge restoration, foundation stabilization, foundation raising, soil compaction grouting; soil & rock grouting
Construction - pavement under sealing, slab jacking and slab raising
Marine - underwater foundations, piers, breakers, shoreline foundations
Mining - tunnel lining, contact grouting, shaft waterproofing
Utilities - encasements, waterproofing, slope line grouting
Geotechnical - deep well casing, monitor wells, well sealing and abandonment
Features of vertical grout injection pump
Compact structure, light weight, easy operate, low maintenance cost;
With digital display counter: it can display at any time, and can accumulate work times;
Flow and pressure can be adjusted step-less;
Equipped with emergency unloading valve: in case of an emergency, it can be load-off instantly;
In low pressure, it will be flow-converging of two pumps; In high pressure, there is only one pump work. Low pressure and large flow, high pressure and low output;
With full-hydraulic shaft device,stable and reliable operation;
Cooling type: water-cooling and air cooling; Suitable for hot and cold areas.
During-sale service for vertical grout injection pump:
1. Acceptance of the product
2. Assist client product construction scheme
After sale service:
1. Spare parts will be delivered as you need.
2. Engineers will go to clients’ site for guiding the installation and test-running;
3. Warranty period: 12 months since the installation and commissioning;
For more information about vertical grout injection pump machine, please feel free to contact us.