tilting jacketed kettle

jacket kettle tilting jacketed kettle steam heating tilting jacketed kettle with agitator

buy jacketed kettle, stainless steel jacketed kettle, stainless steel steam jacketed kettle tilting jacketed cooking kettle steam heating cooking port from alibaba

steam jacketed kettle  advantage:

1) This boiler has many types, and we can produce according to customers'  demands
2) Can heat by electricity
3) Sugar and other flavors can be mixed by agitator

4) In accordance with user requirements,can increase the mixing device

5)To cook , boil  or concentrator

jacket kettle tilting jacketed kettle steam heating tilting jacketed kettle with agitator

  steam jacketed kettle picture and image

steam jacketed kettle tilting  jacketed cooling pot

An electric-jacketed kettle is similar to a double boiler and cooks large quantities of food by using electric heat. It is designed with both an inner and outer steel wall that cooks the contents inside by releasing heat from the heating oil in the space between the walls.

These devices are often used to cook foods like stock, gravy, sauce, or soup, and may be powered by electricity or gas. They come in various sizes, for installation on the floor, countertop, or wall. Electric-jacketed kettles are often used in restaurants and industrial kitchens, where very large amounts of food are prepared daily.

It is a simple machine; we can use it at first sight when we see it. But we still would like to tell a little more about it.

1. Installation

When you get the kettle, please find a suitable place to install it. A piece of flat ground will be a good choice. And remember, the kettle is for cooking, so a ventilated environment will be needed.

1. About heating oil

In the above drawing, you can see there is a jacket in the kettle. I put some red → in the jacket. You need to add the heating oil in to the kettle before you use the kettle. There will be labels on the oil in let hole and oil discharge hole, as well as a third hole for the heating oil.

Yes, the third hole. You feed heating oil in the “heating oil inlet hole” first. Keep feeding until oil flow out from the “third hole”. Now, you can see, the third hold I mentioned is in fact a heating oil overflow hole. When you see oil flow out from it, stop feeding and close the oil inlet hole, but keep the overflow hole open, forever.

You do not need to add oil to the jacket until the oil in the jacket get very sticky and can not transfer heat as faster as the beginning time.<once you feed oil, you can use at least 10month or 1 year. >

When you change the oil, open the valve at the bottom of the kettle, and oil will flow out. Than you add oil as above mentioned is ok. But do not forgot to close the oil discharge pipe before you add new oil. And make sure the overflow hole open forever.

You can close the overflow pipe. But for the first time you add heating oil in, make sure the overflow pipe open, because heating oil expands when heated, then the capacity of the oil will bigger, so some oil will flow out. After two or three batches, you can close the over flow cover, until next time you add new oil in.

Tips:

You can put a filling funnel in the heating oil inlet hole to make sure no oil spray out when feeding.

You can put a jar or a pot under the overflow pipe to collect the oil which flow out from it. This will save some oil for you.

1. Wire connection

The picture above is the inner side picture of the kettle control box. You can see A B and C between the red box and yellow box. In each box, 3 connectors. The 3 connector in yellow box have already connected in our factory. You need to connect your wires to the connectors in red box. You are suggested to get an electrician.

For different country, the volts do not the same, such as china use 380V 50Hz 3Phases, but USA use 220V 60Hz 3phase. So the connection parts will be a little different. When you get the kettle, take a photo send to us, then we will let you know how to connect the wires to the control box.

1. Before you use the kettle

We are a factory, all machine are produced according to the exact order, and after the products finished, it will be packaged in suitable package right away and send out. So the kettle you get cannot be used directly. You are strongly suggested clean the kettle carefully to make sure the inner side of the kettle is safety for you food.

Usually you can feed water in, and heating the water in the kettle, then clean it use the hot water. Most of our customers will heat this kettle with boiling water and moving the boiling water with the agitator.

Treat clean the kettle as your first text step of the kettle is not a bad idea.

1. Cooking your product

After cleaning, you can feed your raw material of your product into the kettle, and press the button of heating, mixing…. You can preset the temperature at the control box.

When temperature arrived at your preset temperature, system will stop heating, and keep the temperature for you. After the temperature gets lower, system will continue to heating.

1. Read above tips before you use the kettle, and need any other help on using our kettle, feel free to let me know.

My contact information can be found in page footer

 jacket kettle tilting jacketed kettle steam heating tilting jacketed kettle with agitator