Main Products: Filling Machines ,Labeling Machines ,Capping Machines ,Shrinking Machine ,Other Machines
Injection Molding Machine For Hdpe
Negotiable /Set
Min.Order:1 Set
Quick Details View All >
Zhangjiagang Mars Packing Machinery Co., Ltd.
Business Type: Manufacturer,Trading Company
Jiangsu ChinaMain Products: Filling Machines ,Labeling Machines ,Capping Machines ,Shrinking Machine ,Other MachinesProduct Details
1. High-speed CPU based Siemens SP300 control system with Operator-friendly interfaces assures auto-protection function of machine and automatic process control.
2. Profibus-DP communication module allows for instantaneous response and precise control of the machine hydraulic system and robot.
3. Accumulator from REXROTH provides adequate hydraulic force.
4. Independent BOSCH servo-valve control of mold clamping, ejection and injection contributes to instantaneous, stable and precise machine movements.
5. Accurate control of mold stroke prolongs mold life.
6. Specially designed take-off plate shortens robot stroke.
7. SEW servo motors from Germany for the robot leads to fast and accurate control of robot stroke, which in turn shortens preform transfer time as well as extending machine life.
8. Higher machine rigidity with thicker platens and heavier machine platform enables the machine to run fast but stable.
9. Preform can be accepted in accordance with peform drawing confirmed.
HDPE/LDPE cap injection machine
Model | TP-32PET | TP-48IVPET | TP-56IVPET | ||
Injection Unit | Screw L/D ratio | L/D | 25 | 25 | 25 |
Screw Diameter | mm | 85 | 100 | 120 | |
Injection Pressure | Kgf/cm² | 1080 | 907 | 907 | |
Machine size (L*W*H) | Mm | 8450×3590×2160 | 9410×4380×2400 | 9410×4380×2400 | |
Shot Volume (Max.) | cm³ | 1700 | 2850 | 2850 | |
Shot Weight | g | 2040 | 3420 | 3420 | |
ors | 72 | 121 | 121 | ||
Clamping Unit | Clamping Force | Ton | 280 | 320 | 320 |
Clamping Stroke | Mm | 545 | 500 | 500 | |
Mold Thickness (min/max) | Mm | 280~700 | 480~780 | 480~780 | |
Tiebar Spacing (W*H) | Mm | 610×610 | 660×860 | 660×860 | |
Ejector Storke | Mm | 150 | 180 | 180 | |
Ejector Force | Ton | 8 | 13 | 13 | |
No.of Ejector Pins | Piece | 5 | 11 | 11 | |
System Pressure (max) | Kg/cm² | 140 | 140 | 140 | |
Preform Mold | Caviation (max.) | Piece | 32 | 48 | 56 |
Preform Length (max.) | Mm | 190 | 190 | 190 | |
Hot-runner | Pneumatic Valve-gate Hot Runner Mold | ||||
Robot | T/O Tubes | Piece | 96 | 144 | 168 |
Installation Power | Pump Motor Power | KW | 45 | 45+75 | 45+75 |
Robot Power | KW | 10 | 25 | 25 | |
Mold Heating | KW | 38 | 42 | 44 | |
Machine Heating | KW | 37 | 71 | 71 | |
Total Power | KW | 130 | 258 | 300 | |
General Requirements | AC Power(3 Phase 4 Line) | V | 380 | 380 | 380 |
| °C | 5~15 | 5~15 | 5~15 | |
Chilling Water | Mpa | 0.8 | 0.8 | 0.8 | |
| L/min | 420 | 600 | 600 | |
| °C | below25 | below25 | below25 | |
Cooling Water | Mpa | 0.25 | 0.3 | 0.3 | |
| L/min | 100 | 200 | 200 | |
Notes: A: Recommended chilling water temperature is 5-15°C B: The data are subject to change for contineous improvement in technology | |||||
Pciture
Contact Supplier
You May Like
New Products
Popular Searches
Recommended Products
Find Similar Products By Category
Facebook
X
Pinterest
Linkedln