Specifications

1.injecting aluminum liquid into the motor rotor
2.a PLC control
3.three operating modes of inch

It is specially designed for injecting aluminum liquid into the motor rotor, a PLC control, three operating modes of inch, manual and semi-automatic, one-by-one execute actions of slow, quick injecting, pressurizing and cutting off the pouring head. It's especially available for injecting Y-type motor rotors and similar motor rotors. The 400KN model mainly for injecting micro-motor rotors of fans and laundry machines without actions of three-step injecting and pouring head cut off. It is loaded with guard barriers to prevent the operator from burnt injury. Nominal capacity: 400-10000KN Iron core: D50-D600mm

 

Item		Unit	HJ013-40	HJ013A-100	HJ013-200	HJ013-315	HJ013-500	HJ013-630
Motor Rotor Range			Micro-motor	Y80~Y160	Y160~Y280	Y200~Y355	Y280~Y500-4	400~600
Nominal Close-die Force		KN	400	1000	2000	3150	5000	6300
Injecting Force		KN	100	380	560	800	2000	1500
Pressurizing		KN	/	600	900	1140	3150	3000
Cut-off Force		KN	/	95	300	370	1000	1250
Working Pressure		Mpa	28	25	25	25	25	25
Ram Stroke		mm	320	600	580	800	900	1000
Injecting Stroke		mm	150	200	250	400	500	650
Daylight		mm	520	750	900	1150	1500	1800
Aluminum Liquid Amount		kg	/	6	19	60	150	200
Ram Speed	Quick Descent	mm/s	65	100	100	80	120	150
	Slow Descent		10	16	16	10	10	10
	Return		105	100	80	60	100	100
Injecting Speed	Slow	mm/s	155	38	65	45	45	55
	Quick		600	1000	1000	1000	1000	2000
	Return		405	100	160	120	100	100
Opening Table Size	LR	mm	460	710	900	1120	1380	1500
	FB		400	630	900	1120	1400	1500
Overall Size	FB	mm	1600	1650	4600	4730	5518	6445
	LR		1750	2480	3100	3800	5445	7035
	Height above Floor		2480	3855	4450	5410/4110	5018	5512
Motor power		kw	5.5	11	15	18.5	74	74