Product Details

Applications & Features

C-frame type,hydraulic system built-in with tidy appearance, optional of preset pressure or preset stroke, made for straightening shafts and sectional material, press-fitting sleeve parts, bending,embossing and drawing as well as pressing various plastic and powder wares. C-frame machine supplies easy approach to operate in three directions. Nominal capacity: 10-25000KN

Main Technical Data

Item		Unit	YF30-2.5	YF30-4	YF30-6.3	YF30-10	YF30-16	YF30-25	YF30-40	YF30-63	YF30-100	YF30-200	YF30-315	YF30-500
Nominal Force		KN	25	40	63	100	160	250	400	630	1000	2000	3150	5000
Max.Working Pressure		Mpa	8	12.5	16	20	20	25	25	25	25	25	25	25
Ram Stroke		mm	125	200	200	250	320	350	400	400	450	450	450	1200
Throat Depth		mm	110	125	180	250	250	280	320	320	320	350	350	1500
Daylight		mm	210	360	360	450	520	560	600	650	710	710	710	1600
Table Size(LRxFB)		mm	300x200	320x240	360x320	500x420	560x480	630x520	700x580	710x600	710x630	710x630	1000x650	2500x2500
Blanking Hole		mm	Φ80	Φ80	Φ80	U100	Φ100	Φ145	Φ125	Φ165	Φ80	/	Φ170	/
Table Height above Floor		mm	900	900	900	700	700	700	700	800	820	700	700	400
Ram Speed	Descent	mm/s	38	38	55	45	45	115	63	115	110	180	180	130
	Work		38	38	55	25	10	15	14	8	8	8	8~15	5~12
	Return		100	100	140	130	80	120	96	105	90	150	120	100
Overall Size	LRxFB	mm	1105x555	1105x555	1295x595	1125x740	1215x790	1485x860	1540x860	1700x950	1900x860	1240x2540	1905x2245	4850x2500
Overall Size	Height above Floor	mm	1720	1860	1900	1820	1985	2030	2164	2488	2705	3440	4190	7620/6000
Motor Power		kw	1.5	2.2	3	3	3	4	5.5	5.5	7.5	22	30	30

FAQ ABOUT FOUR COLUMN HYDRAULIC PRESSES

Does welded beam easy deformation?

We treat it with tempering treatment to reduce internal stress.Besides, we also make casting beam.

What is the treating process of four column?

Four columns are made of 45# hot rolling round steel,then aligning,medium frequency hardening and chroming to ensure the precision,perpendicularity and glossiness.

The oil cylinder is important part,what if it broke?

We use forging cylinder which is forged by one 45# round steel,no welded.The broke rate is almost zero.

What about the electric system?

We use PLC electric control system with less line,easy maintenance and can programmable.

If part of the machine broke,does it easier to buy it in our country?

We can use customer appointed accessories if necessary.

Do you provide after service?

We provide technical service for life.

we are manufacturer of hydraulic press more than fifty years and can manufacture non-standard hydraulic press as your need( such as large worktable,deep slider stroke,multiple cylinder,high speed,double acting...)