Product Details

Application & Feature

Manufacturing various T-pipe specifications, and gaining parts of 90 degrees or 135 degrees intersection angle as long as you alter the position between two side cylinders.

It has been made up to 4000 ton capacity with 300 MP a high-pressure unit, max. T-pipe diameter is 325,10S wall depth with carbon steel or stainless steel.

Stand-alone hydraulic and electrical system with PLC executes three operations of inch, manual and semi-automatic , featured with layout optimization, easy repair, reliable operation, high productivity and quality products.

Main Technical Data

Technical Parameter		Unit	HJ041-63 Four-column	HJ041-100 Four-column	HJ041-200 Four-column	HJ041-315 Four-column	HJ041-630 Four-column	HJ041-630 Framed	HJ041-1000 Framed	HJ041-1500 Framed
Nominal Force		KN	630	1000	2000	3150	6300	6300	10000	15000
Lateral Force		KN	250x3	500x2	1000x3	2000x3	3150x3	5000x2	8000x2	12500x2
Max. Working Pressure		Mpa	25	25	25	25	25	25	25	25
Daylight		mm	500	900	1120	1250	1800	1200	1500	1800
Ram Stroke		mm	230	600	500	600	1000	500	800	800
Ejector Stroke		mm	150	100	200	200	350	350	400	400
Table Height above Floor		mm	800	860	550	650	500	600	600	1550
Max.Distance between L&R Piston End-faces		mm	600	600	1000	1120	1800	1200	1400	2000
Max.Distance from Rear Piston End-face to Table Center		mm	300	300	500	450	900	/	/	/
Height from Lateral Cylinder Center to Table		mm	100	120	220	320	350	320	400	500
Ram Speed	Quick Descent	mm/s	20	160	120	80	120	60	60	100
	Work		4~6	10~23	12~24	10	6~13	8	6	6
	Return		40	130	150	60	150	100	80	80
Bilateral Cylinder Synchro Extruding Speed		mm/s	17	10	14~24	8~16	6	3~5	3~6	3~5
Motor Power		KW	5.5	11	15.5	22	30x2	59.5	51.5	143.5
Overall Size	FB	mm	1525	1700	2200	2535	4790	4132	4250	2000
	LR		2870	3000	4800	5355	5860	4856	6650	4800
	Height above Floor		2400	3260	5015	4312/4127	5920	6240	5780	3520D
Bilateral or Triple-lateral Cylinder Layout			D	C	D	D	A	E	E	E

1.Specifications mentioned above are subject to any change without notice.

2.The products can be tailored as customer's desire.

3.Letter A means triple-lateral cylinder layout, the left and the right side cylinders are opposite and the other at the rear side at 90º angle to each other. C represents bilateral cylinder layout, the left cylinder at 90º angle to the rear or the left cylinder at 135º angle to the rear. D indicates triple-lateral cylinder layout, the left and the right side cylinders are opposite and the other at the rear side at 90º angle to each other or 45º angle to the right. E bilateral cylinder layout, the left and the right side cylinders stand oppositely.

FAQ ABOUT FOUR COLUMN HYDRAULIC PRESSES

Does welded beam easy deformation?

We treat it with tempering treatment to reduce internal stress.Besides, we also make casting beam.

What is the treating process of four column?

Four columns are made of 45# hot rolling round steel,then aligning,medium frequency hardening and chroming to ensure the precision,perpendicularity and glossiness.

The oil cylinder is important part,what if it broke?

We use forging cylinder which is forged by one 45# round steel,no welded.The broke rate is almost zero.

What about the electric system?

We use PLC electric control system with less line,easy maintenance and can programmable.

If part of the machine broke,does it easier to buy it in our country?

We can use customer appointed accessories if necessary.

Do you provide after service?

We provide technical service for life.

we are manufacturer of hydraulic press more than fifty years and can manufacture non-standard hydraulic press as your need( such as large worktable,deep slider stroke,multiple cylinder,high speed,double acting...)