Specifications

1.Good Appearance
2.Easy operation and repair
3.CE, ISO, SGS certification

Manufacturing various T-pipe specifications, and gaining parts of 90 degrees or 135 degrees intersection angle as long as you alter the position between two side cylinders. It has been made up to 4000 ton capacity with 300 MP a high-pressure unit, max. T-pipe diameter is 325,10S wall depth with carbon steel or stainless steel. Stand-alone hydraulic and electrical system with PLC executes three operations of inch, manual and semi-automatic , featured with layout optimization, easy repair, reliable operation, high productivity and quality products.

 

1). Working pressure and slider stroke can be adjusted.

2). Completed steel plate design guarantee machine to be strong and stable.

3). Oil cylinder adopt welded steel frame rigid to deflection moment. Shot blasting and specially treated against RUST.

4). Overload overflow protection is outfitted to hydraulic system, can assure no leakage, and the oil level can be read or seen directly

5). Hydraulic support insurance circuit to prevent go-down of slider out of control.

6). Electrical panel with cooling system designed to meet CE Standards and composed of automation.

 

Technical Parameter		Unit	HJ041-63 (Four-column)	HJ041-100 (Four-column)	HJ041-200 (Four-column)	HJ041-315 (Four-column)	HJ041-630 (Four-column)	HJ041-630 (Framed)	HJ041-1000 (Framed)	HJ041-1500 (Framed)
Nominal Force		KN	630	1000	2000	3150	6300	6300	10000	15000
Lateral Force		KN	250x3	500x2	1000x3	2000x3	3150x3	5000x2	8000x2	12500x2
Max.Working Pressure		Mpa	25	25	25	25	25	25	25	25
Daylight		mm	500	900	1120	1250	1800	1200	1500	1800
Ram Stroke		mm	230	600	500	600	1000	500	800	800
Ejector Stroke		mm	150	100	200	200	350	350	400	400
Table Height above Floor		mm	800	860	550	650	500	600	600	1550
Max.Distance between L & R Piston End-faces)		mm	600	600	1000	1120	1800	1200	1400	2000
Max.Distance from Rear Piston End-face to Table center		mm	300	300	500	450	900	/	/	/
Height from Lateral Cylinder Center to Table		mm	100	120	220	320	350	320	400	500
Ram Speed	Quick Descent	mm/s	20	160	120	80	120	60	60	100
	Work		4-6	10-23	12-24	10	6-13	8	6	6
	Return		40	130	150	60	150	100	80	80
Bilateral Cylinder Synchro Extruding Speed		mm/s	17	10	14-24	8-16	6	3-5	3-6	3-5
Motor Power		kw	5.5	11	15.5	22	30x2	59.5	51.5	143.5
Overall Size	FB	mm	1525	1700	2200	2535	4790	4132	4250	2000
	LR		2870	3000	4800	5355	5860	4856	6650	4800
	Height above Floor		2400	3260	5015	4312/4127	5920	6240	5780	3520
Bilateral or Triple-lateral Cylinder Layout			D	C	D	D	A	E	E	E