1. Introduction of Fine Magnetic Separator:

Fine Magnetic Separator is generally a low cost method of recovery, unless high intensity separators are required. The electro-magnetic high intensity separators that produce 20, 000 gauss, tend to be expensive. However, the rare 

earth 

magnetic separators are relatively inexpensive and can produce magnetic fields around 6, 000 gauss. 

So, whenlooking for a process to recover valuable minerals, magnetic separation should not be 

overlooked, if some of the material is magnetic or PARA-magnetic.

 

2.Principle of Fine Magnetic Separator:

When the raw materials flow into the tank body of the wet drum magnetic separator, firstly, the flowing direction of the raw materials is the same as the rotary direction of the magnetic drum, the iron magnetite materials are attracted to the surface of drum. This is the first separation. In the second step, the flushing water below flush the raw materials back for the second separation. This time the flowing direction of the raw materials is opposite to the rotary direction of the magnetic drum. Then along with the rotation of drum, the iron magnetite materials on the surface of drum will finally leave the magnetic field and fall to the ore concentrate box under gravity. Also, the flushing water above helps to flush the iron magnetite into the ore concentrate box. The weak magnetic and non-magnetic materials can not be attracted and will flow to the discharge pipe for tailings.

 

3.Major Technical Parameters of  Fine Magnetic Separator:

Model	Roller size (diameter length mT)	Roller surface magnetic induction density (mT)			Processing capacity		Motor power kw	Roller rotating speed r/min	Total weight kg
		Pole geometric center value	Sweeping and separarting area average value	Highest magnetic induction density	t/h	m3/h
CTB-718	750*1800	120	155	180	20~45	72	3	35	2100
CTB-918	900*1800	148	165	190	25~55	90	4	28	2900
CTB-924	900*2400	148	165	190	35~70	110	4	28	3600
CTB-1018	1050*1800	148	165	190	40~75	120	5.5	22	4000
CTB-1021	1050*2100	160	240	180	45~88	140	5.5	22	4500
CTB-1024	1050*2400	148	165	190	52~100	160	5.5	22	5000
CTB-1030	1050*3000	160	240	280	65~125	200	7.5	22	6200
CTB-1218	1200*1800	160	240	240	47~90	140	5.5	19	5800
CTB-1224	1200*2400	148	165	165	82~120	192	7.5	19	6200
CTB-1230	1200*3000	148	165	165	80~150	240	7.5	19	7200
CTB-1530	1500*3000	180	240	240	90~170	270	11	14	8900
CTB-1540	1500*4000	180	240	240	115~220	350	11	14	9900

Packing:By container for Lab Equipments Low Cost Fine Magnetic Separator

Shipping:Qingdao Port

1. Shandong Hengchuan company signs a long-time after-sale service agreement with customers.
2.. Shandong Hengchuan company provides rational and practical design according to customers' request.
3. Shandong Hengchuan company sends experienced engineers to assemble and test the machine within the period as agreed in the contract.
4. Within warranty period, Shandong Hengchuan company provides free repair if quality problems emerge.
5. Shandong Hengchuan company provides free training of operation and maintenance for customers.
6. Shandong Hengchuan company supply high quality accessories in low price.
7. Shandong Hengchuan company make an excellent filing of customers for long-term following-up service. Any question or problem about the products can be answered via online support

1.Our Factory                                                                                                      

 Qingzhou Hengchuan Ore Machinery Co.,ltd,was established in 2002,a leading ore machinery manufacturer in China,covering an area of 20000 square meters,have 6 engineers,20 technicians and 100 workers.
Our main products:Gold Mining Machinery,Magnetic separators and all kinds of mining dredger etc.

2.Our customer                                                                                                                

Our main market is domestic,Africa and Southeast Asia,such asCameroon,Ghana,Mali,Zimbabwe,Malaysia,Indonesia and Philippines etc.

So much customers interested in our Cutter suction dredger and have buy it.

3.certifications  

In order to give you a responsible quotation, you can inform us the following information
1).Type of minerals to be mined?
2).Type of deposit (Primary/hard rock, or secondary/placer)?
3).Physical characteristics of the ore (sandy, with light clay or heavy clay)?
4).Intended feed capacity (Tons/hour)?