Specifications

(SF group)Shandong Yanggu shuguang cable co. provide every kinds of electric cables and wires

POWER CABLE
PVC INSULATED AND SHEATHED POWER CABLEGB/T12706-2002
USAGE
PVC INSULATED AND SHEATHED POWER CABLE IS USED AS POWER DISTIBUTION AND TRANSMISSION LINE AT RATED VOLTAGE 0.6/1 KV AND FREQUENCY 50 HZ WHICH CAN BE FIXED INSTALLED.                                                                                                      USING PROPERTY
1.THE LONG-TIME WORKING TEMPERATURE OF CABLE SHOULD NOT BE HIGHER THAN 70.

2.WHEN CORE IS IN SHORT-CIRCUIT(MAX 5S)THE TEMPERATURE SHOULD NOT EXCEED 160 .

3.WHILE INSTALLATION THE AMBIENT TEMPERATURE SHOULD NOT BE LOWER THAN 0,AND THE BENDING RADIUS SHOULD NOT BE LESS THAN 10 TIMES OF OUTER DIAMETER OF CABLE.                                                               MODEL:                                                                                                                                                                                                                           VVCOPPER CORE PVC INSULATED AND PVC SHEATHED POWER CABLE

VLVALUMINIUM CORE PVC INSULATED AND PVC SHEATHED POWER CABLE

VV22COPPER CORE PVC INSULATED FINE STEEL WIRE ARMOURED PVC SHEATHEDED POWER CABLE

VLV22ALUMINIUM CORE PVC INSULATED FINE STEEL WIRE ARMOURED PVC SHEATHEDED POWER CABLE
CROSS-LINKED POLYETHYLENE INSULATED POWER CABLE(GB/T12706-2002)                               USAGE:                                                                                                                                                                                                                             THE CABLE IS USED IN ELECTRIC TRANSMISSION AND DISTRIBUTION SYSTEM OPERATING AT RATED VOLTAGE 0.6/1,1.8/3,3.6/6,6/10,8.7/10,8.7/15,12/20,21/35,26/35Kv.

USING PROPERTY                                                                                                                                                                                              1.NEEDNT WARM-UP WHILE INSTALLATION THE AMBIENT TEMPERATURE ABOVE 0.

2.THE LONG-TIME WORKING TEMPERATURE OF CABLE SHOULD NOT BE HIGHER THAN: 90 WHEN THE OUTER SHEATH IS PVC, 80 WHEN THE OUTER SHEATH IS POLYETHYLENE.

3.WHEN CORE IS IN SHORT-CIRCUIT(MAX 5S)THE TEMPERATURE SHOULD NOT EXCEED 250 . WHILE INSTALLATION THE BENDING RADIUS SHOULD NOT BE LESS THAN: 20d+D)±5% WHEN SINGLE CORE CABLE, 15d+D)±5% WHEN TRI-CORE CABLE.D-OUTER DIAMETER OF CABLE, d-OUTER DIAMETER OF CONDUCTOR