New Brass Time Delay Sensor Electronic Toilet Flusher
1.Product Description:
 Size
 G1/2'' Urine Flusher
 Adjustable Shut
 6~10S
 Working Pressure
 0.5-22kg
 Adjustable Water consumption
 2-4L
 Temperature of Medium
 Less than 90 °C
 

1.Whole brass products
2.Fine grinding and polishing the surface, the gloss is a General faucet twice
3.The use of high-quality fine grinding valve, Plane Imports ceramic chip,
Very good wear resistance and sealing, more than 500,000 trouble-free run
4.faucet products through high-pressure water testing to ensure quality
5.Modeling novel, humanized design, and rich imagination and creativity
6.Bright surface appearance
7.Non-toxic, safe, light switch
 

3.Warranty:
Our valves shoud be cleaned and maintained regularly according to the water environment and water quality (usually one year)
1.Stop supplying water, unscrew the cover of the main body with a spanner and hitch the floating valve
2.Clean the strainer and rubber seals of the floating valve,then stab the Mud-stopping slot with steel wire less than 0.4mm .Make sure the slot has no sundries
3.Clean the silt and flaxsilk in the “V” of the rubber ring inside the floating valve,make sure the sealing performance
during working
4.Fit those parts back to their place and buck-up the cover,make sure there is no see page before you use it again.
 
 
4.CARE AND INSTALLING INSTRUCTIONS
To preserve the finish on the metallic parts of your faucet, apply nonabrasive wax, such as car wax.
Any cleaners should be rinsed off immediately. Mild abrasives are acceptable on stainless steel finish.