Specifications

(1).Short granulating time
(2).High efficiency and Energy saving
(3).Large handling capacity ,Low energy consumption
(4).GMP

Principle

       The powder raw material and binder in barrel will be stirred into wet soft material by stirring oar, and then be cut into uniform wet granule by cutting oar.

 

Features

      GHL Series High Speed Mixing Granulator adopts horizontal barrel(cone) structure. Its structure is reasonable.
The inner surface of equipment has no dead corner. It works at sealed state and conforms to the requirements of GMP.
      Short granulating time, high efficiency and energy saving.
      The character of granule is uniform and the fluidization of granule is good. It provides ideal granule material for tablet pressing procedure.
      Compare with traditional process, it can reduce 25% of binder and shorten drying time too.
       Each batch needs 2 minutes to dry mixing and 1 ~ 4 minutes to granulating. Compared with traditional process, its efficiency can raise 4 ~ 5 times.
       Whole operation has strict safe protective measures.

 

Technical Parameters

item		Specification
Name	unit	10	50	150	200	250	300	400	600
Capacity	L	10	50	150	200	250	300	400	600
Output	kg/batch	3	15	50	80	100	130	200	280
Admix speed	r.p.m	300/600	200/400	180/270	180/270	180/270	140/220	106/155	80/120
Admix power	kw	1.5/2.2	4/5.5	6.5/8	9/11	9/11	13/16	18.5/22	22/30
Incise speed	r.p.m	1500/ 3000	1500/ 3000	1500/ 3000	1500/ 3000	1500/ 3000	1500/ 3000	1500/ 3000	1500-3000
Incise power	kw	0.85/1.1	1.3/1.8	2.4/3	4.5/5.5	4.5/5.5	4.5/5.5	6.5/8	9/11
Pressure air amount	m3/min	0.6	0.6	0.9	0.9	0.9	1.1	1.5	1.8