Product Details

Specification

Items	Unit	LZ9-12/1200	LZ10/800	LZ9/700	LZ10/560	LZ10/400
Reel diameter	mm	900	800	700	560	400
Draw passage	time	9-12	10	9	10	10
Incoming dia	mm	Φ14-8	Φ10-8	Φ8-6.5	Φ6.5-5.5	Φ14-8
Outgoing dia	mm	Φ5-3	Φ4-3	Φ3-2.5	Φ2-1.8	Φ1-0.8
Wire darwing line	m/min	300	360	480	720	840
Incoming strength	Mpa	≤1300	≤1300	≤1300	≤1300	≤1300
Total compressibility	%	87.24-85.94	84-85.94	85.94-85.21	90.53-89.29	87.24-84
Average compressibility	%	20.48-19.58	18.42-19.58	19.58-19.13	21.00-20.02	18.61-16.74
Single motor power	Kw	110-90	90-55	75-55	37-22	15-7.5

Note: We can produce according to your requirements.

wire processing machine(5.5-1.5mm in usually)

1biggest inlet diameter: 5.5 mm

2minimum inlet line 1.5mm

3 max compression ratio: 89.2%

4the highest drawing speed 16m/s, normal speed: 12m/s

5water and water pressure: 8 m³/h water pressure 0.25 Mpa or more

6air and pneumatic: 2.0 m³/h Air pressure 0.6 Mpa or more

7motor :(1) the main motor: the first block 30KW, and the rest 22KW, ac conversion motor

(2)Take-up machine :22KW ac frequency conversion motor (1,250 h-wheel),

(9) block: straight line type: diameter is 560mm

8 block materials: stainless steel,ZG45 - 55,working surface,tungsten carbide spraying alloy powder, hardness more than HRC60 finish.32 Ra or less

9Using life:two years or more,since wear chamfer, free replacement.

10 block cooling way: inner by slit type water-cooling, The outer cooled by ring air

mould box adopts welded parts, surface of guide wheel or roller spraying tungsten carbide rod, using life is one year,since wear chamfer, free replacement.

(2) mode box body are two parties: lubrication powder body and the water body of indirect cooling

11mode box can be adjusted universally to ensure the angle of wire drawing.