Product Details

A jaw crusher is generally used as a primary crusher in a crushing circuit. Product is fed into the top of the jaw crusher by a vibrating grizzly feeder. The eccentric rotating drive shaft causes the movable jaw to oscillate crushing the aggregate against a fixed jaw. Jaw crushers are run on belt drives driven by an electric motor or diesel engine. Jaw crushers are used extensively throughout the aggregate and mineral processing industry.

Working Principle of Jaw Crusher:
The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw. The stuff will be crushed in this process. The angle of Jaw Crusher between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw of Jaw Crusher moves away from fixed jaw by the pulling of rod and spring, the products after crushing will be discharged from the outlet of Jaw Crusher.

Characteristics of Jaw Crusher:

Heavy Duty Jaw Crusher Design
Long Life
Cost Effective
Standard Replacement Parts
High Productivity

Technical Data of Jaw Crusher:

Model	Max. Feeding Size (mm)	Discharge Size (mm)	Capacity (t/h)	Motor Power (kW)	Overall Dimensions (mm) LWH	Weight (t)
PE250×400	210	20-60	10-34	15	1430×1310×1340	2.8
PE400×600	340	40-100	12-38	30	1655×1732×1586	6.5
PE500×750	425	50-100	32-62	55	2030×1966×1920	11.85
PE600×900	500	65-160	40-100	55-75	2290×2206×2370	16.7
PE750×1060	630	80-140	72-130	110	2531×2370×2783	25
PE900×1200	750	98-165	150-230	132	3135×2933×3220	50
PE1200×1500	1020	150-300	200-350	180	3732×4200×3840	100.9
PEX150×750	120	10-40	5-6	15	1380×1658×1025	3.5
PEX250×1000	210	15-50	10-32	30-37	1530×1992×1380	6.5
PEX250×1200	210	15-50	16-35	37	1530×2192×1380	7.7

Notice: Any change of Jaw Crushers technical data shall not be advised additionally.