Golden quality ring die peanut shell pellet mill

Features for TONY peanut shell pellet mill

1. Main drive adopts high accurate gear drive, with an output of about 20% higher than belt drive.
2. The drive part of the machine including motor optimize, the high quality SKF bearings and NAK oil seals 
ensure high efficient and steady driving with low noise.
3. The imperative feeder device is adopted, which making the machine operate smoothly as the material like wood sawdust, corn, wheat, and rice straw is very light, so they are needed to be pushed into pelleting 
chamber by force.
4. Special design of feed conditioner adopts the frequency conversion speed regulating control to 
guarantee wood pellets quality.
5. The ring die is made by international advanced technology, has long service life and ensure high quality of pellets.
6. The international advanced compensation type flexible coupling is of novel and compact structure, make sure operation with safety, low noise and less trouble.
7. Permanent magnet device can remove impurities in the pelleting process.

Spare parts of TONY peanut shell pellet mill

Rollers of the peanut shell pellet mill	Be made of alloy steel and stainless steel with longer service time:2000-2500 hours.	Ring Die of the peanut shell pellet mill	Double layers with longer service time: 2500-3000 hours; Be made of alloy steel and stainless steel with professional heat treatment tech.
Main Shaft of the peanut shell pellet mill	Be forged three times by traditional handcraft to reach best toughness and hardness, not easy to broken.	Vertical motor of the peanut shell pellet mill	working vertically; Mounting hole is centered with shaft and equally distributed, offering more power and working stability for the pellet machine.
Gear Transmission of the peanut shell pellet mill	Drived by gear,not reduction box; Gear driving is helpful to increase the usage life of gear, so the maintenance rata of gear is much lower.	Automatic lubrication of the peanut shell pellet mill	A.Spindle automatic lubricatin system B.Roller automatic lubricatin system :it can keep the pellet machine in maintenance for 24hours

Main working process of peanut shell pellet mill

A, Preparing raw materials:
All the raw materials must be crushed into sawdust before going to wood pellet mill. If not, you may need a wood chipper, wood crusher.

B, Drying process:
Before going to the wood pellet mill, the moisture of raw materials must be controlled in 10-15%. This process can be realized by a drum dryer.

C, Feeding process:
The dry raw materials is delivered by a conveyer into the stock bin which is installed over the feed hopper. 

D, Pressing process:
After the raw materials delivered into the rotating die of wood pellet mill, we can start the wood pellet mill. The sawdust will be pressed through 3 or 4 rotating press rollers. The resulting pressure compresses the sawdust and extrudes it through the holes in the die.

Pellets show

Raw materials: Wood chips, straw, cotton stalks, rice husks, peanutshells, bamboo, empty fruit branches, coal, waste paper and so on.
Raw material size: Best size for pressing high quality pellets is 2-4mm.
Raw material miosture: Better to be 10-15%

Packing and delivery

The normal package is wooden box. If export to european countries, the wooden box will be fumigated. If container is too tigher,we will use pe film for packing or pack it according to customers special request.

About us

ZHANGQIU TONY MADE MACHINERY CO., LTD is a professional manufacturer and exporter engaged in the research, production, sale and service of Biomass wood pellet line, wood pellet mills, feed pellet mills, grinding equipment, crushing equipment, drying equipment, cooler and other screening, conveying equipment.

TONY has agents in Germany, France, Serbia, Italy, Bulgaria, Thailand, Malaysia, Vietnam, Croatia, Serbia who can supply machines timely with competitive price and also do better after-sales service. 

We can supply the machines as following:
1.The SKJ Series flat die pellet mill with the volume 100kg per hour to 4 ton per hour.
2.The TYJ Series ring die pellet mill with the volume 800kg per hour to 5 ton per hour.
3.The SKJD Series Pellet Mill with Diesel Engine with the volume 100kg per hour to 400kg per hour.
4.The SKJT Series Pellet Mill with Tractor Engine with the volume 80kg per hour to 400kg per hour.
5.Straw Hammer Mill
6.Wood crusher
7.Wood chipper
8.Drum dryer
9.Packing machine

10.Pellet line

Company appearance

Our service

Why Tony

Contact Information

We need to know the following information when you send inquiry to us:
A. What capacity would your prefer?-----The capacity for vertical ring die pellet mill model
B. What is your raw material?-----According to different raw material (such as hard wood, soft wood, straw, rice husk),  capacity is different.
C. What is your raw material size?-----Best size for pressing high quality pellets is 2-4mm.
D. What is the moisture of your raw material?-----Better to be 10-15%.

For further information about our company & products, contact:
Winnie Hsu
QQ: 3323515409
Mobile/Whatsapp:0086-15854101688
Email:pelletmill07@
Skype:winnie19930806
Tel:0086-531-83698878
Fax:0086-531-83698868