New design floating fish food extruder making machine

Features for Fish Food Making Machine
1.According to different requirements, variety shapes of high-grade feed pellets for fish, shrimps .etc
2.The finished pellets can keep floating for 12 hours without pollution to water.
3.The floating time can be controlled by the puffing degree adjustment
4.Floating fish food making machine can make pellet from diameter 1mm-12mm just by changing the mould.
5.Electric heating device is adopted which can improve the feed expansion rate and pellets floating time.
6.High temperature and high pressure cooking process can kill the salmonellosis and bacterial infections and also makes the pellets easily to digest.
7.The cutting device can be adjusted to make pellets of different length.
8.The wet type machine needs a boiler to make steam which can conduct steam to the conditioner and ripen the raw material in advance.
Technical Features 
1. This extruder equipment adopts the auto-controlling speed feeding tool to produce the feed material evenly. 
2. Electric heating device is adopted which can improve the feed expansion rate and pellets floating time.
3. High temperature and high pressure cooking process can kill the salmonellosis and bacterial infections and also makes the pellets easily to digest.
4. The cutting knife adopts the frequency controlling speed in order to change the material size. 
5. The floating time can be controlled by the puffing degree adjustment.
6. Auto-temperature control system makes the temperature controlling more direct viewing and the parameter more precise.

Fish food processing machine Main Features

1.It can produce different shapes food for cattle, sheep, dog, fish or cat etc.
2. Through the pretreatment of the fodder, it can reduce loss of nutrition and advance the protein ratio. So the fodder will be digested easily by animals.
3. The processing line adopts corn flour, wheat flour,low temperature soya flakes meal, rice bran , wheat bran as raw materials
4. The design high output,low consumption and bacterium reducing is realized by the steam and electric design.

Mixer

1.Main motor: 4.0kw 2. Size: 1.2×0.9×1.4(m)
3. Output: 30kg-40kg/time
Functions:
Mixer makes the raw material which adding water and liquid chemical additive fully mixed equally. the machine mixes the flour and prepares them ready to be used in the next step.

Screw conveyer

Output: 0-250kg/h, Main motor:1.1kw,Size: 2500*600*2300mm
Function:
Screw conveyor can not only convey on the level but also by any angel these materials can be conveyed in the stainless steel roller without leaking, dust pollution.

SLG70Twin Screw Fish Food extruder

Installed Capacity:45.87kw Drive Motor:30kw;
Feeding:0.75kw; Oil-pump: 0.37kw;
Cutting: 0.75kw; Output: 180-240kg/h
Dimension: 2600*950*1750mm

Air conveyer

Main Motor:1.1kw Size:2.5x0.5x2.5 (m)
Functions:
1.Air conveyor conveys the food relying on the wind-force from the blower.
2.It is more suitable for the long distance conveying.
Features:
1.low energy-consumption, high efficiency.
2.It has not the features of leaking material and pollution when the food is conveyed in the sealed stainless steel pipeline

Five Layers dryer (5.4m)

Size:5.4x1.3x2.0 (m) Output:200-260kg/h
Heat Type:Electricity heater Intall power: 45.0kw
Functions:
This dryer can be used to bake and dry the food. It can bake all kinds of the inflating food,Fish food, TVP/TSP food, peanut, nut, chew nut and so on.

Hoister:

Food types PVC for material touch place.
Main Motor:1.2kw
Size:2.0x0.5x2.8 (m)
Convey the product from dryer to double roller.
Flavouring part---Double Drum:
Output:200-500kg/h Size:3.9x0.7x1.3(m) Mian power: 1.5kw

Sifter

Main motor: 0.37kw     Size:1.4x0.7x0.9 (m)
Function:
Sifter uses the motor to imFishus eccentric shaft rotation, thus leads the stainless steel sieve piece reciprocal motion .It can make the food chosen and convey continually. The small pellet and powder are sieved into the material box and big pellet goes on conveying to front. It plays an important role in separating the finished product and powder.

Before sale services: 
1.One year warrantee, life time maintenance with cost price.
2.Provide the free consultation of the equipment.
3.Provide the standard device and the flow chart.
4. According to the clients’ special requirement, offering the reasonable plan and free design helping to select the equipment.
Services during the sales:
1.Help client design the factory and offering professional advice, free engineering drawing for the factory layout
2.Welcome to visit our factory or the domestic clients’ factory.
3.Inspect the machine before leaving the factory.
After sale services: 
1. Oversea install and debug the equipment.
2. Train the first-line operator.
3. Provide the basic formula.
4. Operation/ Service/ Maintenance Manual: Provided In English.
5. We will provide 1-2 engineer to the client's factory for the installation and teach totally in 10 days. The client need provide room, food, round-trip transportation, visa fee and a nominal $50 daily subsidy per person.