Product Details

ZH9409 series Core shooting machine

Product Description

Best Quality Widely Use Core Shooting Machine:

Core shooter is widely applied in foundry industry in recent years, due to use sand core shooting machine to mould, can not only save high salary of moulding labor, because is many boxes stacked pouring, can also reduce the waste of ingate and riser, the coated sand after pouring, collapsibility is very good, good for sand. sand core shooting machine production efficiency is high, the size precision of sand mould, can be appropriately reduced processing amount. Easy operation, the casting finished produts yield high . More foundry prefer using sand core shooting machine to mould.

Technical parameters

(1) ZH9650 four vertical column horizontal parting auto cover sand machine

Technical characteristics:

ZH 9650 cover sand machine is a new type hot-box core shooting machine which the sand core below 25 kilograms, efficient and automatic. It is the top of core shooter which developed based on the ZH-600,ZH-700 type. It is applicable to the sand core of horizontal parting!

ZH9560 core shooting machine is applicable to produce all kinds of complicated sand cores for mass production! It has advantages of accurate sand core size, high productivity, low labor intensity and so on! It adopts the electric heating mode and equipped with the appropriate temperature-controlled instrument.

Type	ZH9650
Maximum size of core box(LXWXH)mm	900x650x300
Maximum distance between molding plate(mm)	650
Die assembly cylinder process(mm)	450
Die assembly cylinder diameter(mm)	125
Sand core maximum weight(kg)	25
Sand hopper maximum capacity(kg)	200
Heated power(kw)	30
Drive mode	Pneumatic
Operate mode	Manual/single
Power(220v)	50HZ
System pressure(Mpa)	0.5-0.6
Sand shoot pressure(Mpa)	0.3-0.45
Used sand core	Phenolic resin cover sand

(2)ZH9407B Core shooting machine

Technical characteristics:

PLC programmable control

Adjustable about the technical parameters

Specializing in the production of valves, off the lower top core core pulling;

Humanized operation

Type	ZH9407B
Molding board maximum size(mm)	760X550
Molding maximum size(mm)	600X500X300
Maximum sand core weight(kg)	30
Molding assembly(mm)	400
Sand hopper capacity(kg)	200
System pressure(Mpa)	0.55-0.7
Heating way	Electric heating
Electric heating power (Kw)	35
Operation mode	Semi-automatic/Automatic

(3) ZH9409 Core shooting machine

Technical characteristics:

PLC programmable control

Adjustable about the technical parameters

Sand core moveable equipment(include the top core)

The top core box templates can move up and down

I t is suitable for four-cylinder, six-cylinder, water jacker sand core system

Humanized operation

Type	ZH9407H-30	ZH9409	ZH9410-50	ZH9412-50
Molding board maximum size(mm)	780×500	900×600	1070×800	900×800
Cover die thick(mm)	200	200	200	200
Movable mould assembly process(mm)	150	200	200	200
Mold assembly	400	400	400	400
Maximum sand core weight(kg)	30	50	50	50
Sand hopper capacity(kg)	200	200	200	200
Heating way	Electric heating Triethylamine	Electric heating Triethylamine	Electric heating Triethylamine	Electric heating Triethylamine
Electric heating power(Kw)	35	35	45	50
System pressure(Mpa)	0.55-0.7	0.55-0.7	0.55-0.7	0.55-0.7
Operation mode	Semi-automatic/Automatic	Semi-automatic/Automatic	Semi-automatic/Automatic	Semi-automatic/Automatic

(4)Z95 series full automatic shell core machine

Technical characteristics:

PLC programmable control

Meet the needs of shell mold ,shell core

Adjustable about the technical parameters

Molding temperature automatic control

Adopt the Permanent baffle board

Type	Z954K	Z955K	Z956K	Z957K
Molding size(mm)	500×320	550×400	650×400	750×580
Cover die thick(mm)	150	150	180	180
Movable mould assembly process(mm)	150	200	200	200
Mold assembly	300	400	400	400
Maximum sand core weight(kg)	15	20	20	25
Sand hopper capacity(kg)	200	200	200	250
Heating way	Electric heating	Electric heating	Electric heating	Electric heating
Electric heating power(Kw)	25	25	30	40
System pressure(Mpa)	0.55-0.70	0.55-0.70	0.55-0.7	0.55-0.7
Operation mode	Auto/Manual	Auto/Manual	Auto/Manual	Auto/Manual

Finished Products

Product Effects