European technology Household Aluminum foil roll re-winder

Multifunction rewinding machine developed against foreign equipments and domestic requirements, which is a fully automatic machine to adhering, take-up, cutting certain rolls in one process .It is suitable for various large jumbo roll into small and narrow roll, such as household aluminum foil roll, paper roll, plastic roll, etc...

Advantages:
1. Computer control to setup and measure the length of foils.
2. High process rate for large volume production.
3. All drivers are automatic, less defect, safety, high efficiency and simple operating.

Uses:
Auminium foil roll, paper roll, plastic roll, etc...

UNGAR (SHANGHAI) CO., LTD is an Austrian enterprise established in 2009 supplying high productive multi-cavity mould and machinery which includes press, stacker, package, re-winder, paper lid cutting, decoiler, scrap aspirator and additional equipments. UNGAR complete integrated production line has been specially designed and developed for the production of aluminum food container and trays.

UNGAR (SHANGHAI) CO., LTD as a technology leader focusing on researching and developing new products with a professional design team, technical department and sales group. In this way, the design team with its headquarter in Austria, manufacturing factory located in Shanghai, professional engineers service and global sales linking by Europe, America, Middle East Gul-food area and most of Asian countries.

UNGAR (SHANGHAI) CO., LTD also offer customized service for technical optimization, mould prove, machine installation, material test, training course, telephone assistance and so on. UNGAR more than just a manufacturer......

UNGAR success can be attributed to the cohesive team environment, both at a state and international level; by drawing from each states market experience, group buying capabilities and deep knowledge pool,UNGAR dynamic team has cemented their company's position as market leader.

Management Team
UNGAR team of long standing managers provide guidance and direction, drawing from their solid experience and industry knowledge, ensure the company's strategic direction leads to a successful future.

Marketing Team
The team's key responsibility is to ensure that UNGAR broad range of and product ranges are communicated effectively both internally and externally; with a thorough understanding of product development, promotion, release strategies, training, and evaluation we ensure our products are designed to meet your needs.

Procurement 
The procurement team brings a wealth of experience to an extremely important role, with the coordinate efforts the procurement team ensures UNGAR products are in-stock when you need it.

Accounts
The accounts teams are responsible for the day-to-day balances and checks of all financial transactions, giving stakeholder's confidence in their long term business relationships with UNGAR.

UNGAR's professional design team with 5 experienced designers in mechanical, pneumatical, and electrical field with more than 10years designing experiance.Headquater localed in Viena Austria.

 Our Advantage and Service

• Welded body with steel plate and high intensity.
• Main motor is made by Siemens.
• Adopts combined pneumatic friction clutch and brake.
• Cluster gear adopts the flooding oil lubrication.
• Six-face rectangle lengthen guide;
• Equipped with hydraulic overload protecting device.
• Electric shut height adjustment with digital display.
• Equipped with lifting balance cylinder.
• Welded body with steel plate and high intensity.

• 1.Q: What about leadtime ?

     A: Normally the leadtime is 60days after we receive the deposit and confirm  the details. All the press machines we use is the best quality in China Yangli brand. The press machine leadtime from Yangli is 50days,  the best leadtime we can give is 60days. 

   

  2.Q: What's the lead time for moulds?

     A: Normally the mould leadtime is 45 days after we confirm all the details with customer. Our professional mechanical enginners from Austria will design the mould according to the samples from customer, or by the specifications offered by customers.    

   

  3.Q:What kinds of mould you can make? and what is your strong point for the moulds?

     A: we can make wrinkle wall mould and smooth wall mould both. For wrinkle wall mould we can make, 7-9" pan, fish pan, bbq pan. For smooth wall mould we can make muffin cup, and cake cup, tar cup,etc. We can also make 2 or 3 portion conatiner moulds as long as you offer us sample or specifications.  Our strong points are all our moulds are WEDM-LS cut, which makes the mould more accurate and precise. Important materials likestainless steel parts we make in Austria. We also recut after heat treatment, which most of makers do not take this process.

   

  4.Q:Does the material need lubricating oil?

     A:yes . Lubricating oil is very important, the oil is food grade and its special. Normally, we will offer customer oil supplier information after order is confirmed. Before you run the machine just pure the oil into the tank directly.   after the order is confirmed , we will provide you the oil supplier’s contact information. Normally  one barrel oil is 170kg,  about 580usd/barrel .

   

  5.Q:Where can i get the aluminum foil jumbo rolls?

     A: After order is confirmed we will offer customer jumbo roll supplier's contact information. You can contact them directly and compare the price.

  Material specification&temperation:   ALLOY -3003, Temper-H24 Or ALLOY -8011, Temper-H22

   

   

  For more informations about UNGAR and UNGAR products, please send us email or call us. 

  Components:

  1.Air compressor

  2. Automatic decoiler&feeder head (with an auto-lubricator)

  3. Siemens brand control panel&PLC

  4. 63 ton Yangli brand vertical pneumatic press

  5. Mould

  6. Auto-stacker with1-5 lanes(optional)

  7. scrap aspirator & press machine (optional)

   

   

  1.Q: What about leadtime ?

     A: Normally the leadtime is 60days after we receive the deposit and confirm  the details. All the press machines we use is the best quality in China Yangli brand. The press machine leadtime from Yangli is 50days,  the best leadtime we can give is 60days. 

   

  2.Q: What's the lead time for moulds?

     A: Normally the mould leadtime is 45 days after we confirm all the details with customer. Our professional mechanical enginners from Austria will design the mould according to the samples from customer, or by the specifications offered by customers.    

   

  3.Q:What kinds of mould you can make? and what is your strong point for the moulds?

     A: we can make wrinkle wall mould and smooth wall mould both. For wrinkle wall mould we can make, 7-9" pan, fish pan, bbq pan. For smooth wall mould we can make muffin cup, and cake cup, tar cup,etc. We can also make 2 or 3 portion conatiner moulds as long as you offer us sample or specifications.  Our strong points are all our moulds are WEDM-LS cut, which makes the mould more accurate and precise. Important materials likestainless steel parts we make in Austria. We also recut after heat treatment, which most of makers do not take this process.

   

  4.Q:Does the material need lubricating oil?

     A:yes . Lubricating oil is very important, the oil is food grade and its special. Normally, we will offer customer oil supplier information after order is confirmed. Before you run the machine just pure the oil into the tank directly.   after the order is confirmed , we will provide you the oil supplier’s contact information. Normally  one barrel oil is 170kg,  about 580usd/barrel .

   

  5.Q:Where can i get the aluminum foil jumbo rolls?

     A: After order is confirmed we will offer customer jumbo roll supplier's contact information. You can contact them directly and compare the price.

  Material specification&temperation:   ALLOY -3003, Temper-H24 Or ALLOY -8011, Temper-H22

   

   

  For more informations about UNGAR and UNGAR products, please send us email or call us.