Counter Flow Cooler  Machine is currentlty the more advanced new cooler ; it uses the principle of counter current , Cooling the high  temperature and high humidity  materials .

     Vertical Wind  Pass through the material layer , and touch the materials first , then the wind turn hot  gradually and touch with the hot  wood pellets , the wind direction  is opposite with the raw materials direction , make the pellets cooled gradually,  avoiding the pellets surface  cracks due  to its sudden  cooling by touching with the cold wind . The air  enters  into the cooler from its bottom fully , wide entering area, high utilization rate, low energy  consumption, easy operation, the cooling effect is remarkable.

     Particles cooled sufficiently and evenly , using a unique slide value is a mechanical vibration nesting , smooth operation, nesting smooth , granular temperature after cooling is not higher than 3-5 degree .

Specificationand technical details of Counter-flow Cooler Set

No.	Product Name	Model	Power	Technical  Details	Pictures
101	Air-Lock	BFY-7	1.5KW	1.Product name:Air Lock 2. Model: BFY-7 3. Power :1.5kw 4. Application: air-lock the wind
102	Counter-Flow  Cooler	YSKLN-1.5	1.5+0.25KW	1. Product Name: Counter-Flow  Cooler 2. Model:YSKLN-1.5 3.Capacity:1-2t/h 4.Power:1.5+0.25kw 5. Application : cooling  wood pellets / animal feed pellets ( making
103	Simple  Screener	JD110×80	0.25kw	1. Product name: Simple screener 2. Model:JD110×80 3. Capacity:1-2t/h 4. Power :0.25kw 5. Application: Screening out good pellets and bad pellets , making finished wood pellets  good effect
104	Fan Blower	4-72-4.5A	7.5kw	1.Product Name: Fan Blower 2. Power:1.5kw 3. Model :4-72-4.5A 4. Application:  Direct connect, many  fan blower,  transmit the material smooth
105	Cyclone	Φ1000		1. Product name: Cyclone 2. Model:Φ1000 3. Dedusting and discharging
106	Air Lock	BFY-16	4kw	1. Product name: Air lock 2. Model:BFY-16 3. Power:4kw 4. Application:air lock the wind and discharging

  The technical Parameter of the Cooler for Cooling Pellets:

 Feature of Counter Flow Cooler For Cooling the Wood Pellets

1. After cooling pellets temperature don’t exceed room temperature +3-+5°C.

2. Shut down automatic nesting with the unique effect, to avoid cross-contamination between feed.

3. Unique nesting box nesting force.

4. SKLN series with the secondary spiral separator used in combination.

5. Suitable for cooling a variety of pellets material.

PICTURE SHOW

    Caring service, carefully manufacture and desirable price make customers at ease. 
"Customer-oriented", providing customers with whole considerate services;
"Service as core," providing the most suitable products to customers; 
"Quality-centered," All-round services to every customers! 
Technical support: on-site technical training and technical advice available.