Specifications

steel rod mill hot sell in 2011
1.adjustable particle size
2. over 20 years experience
3. all kinds of ores

                         steel rod mill hot sell in 2011

  

1.Main usages of rod mill

 

  applicable to wet fine and coarse grinding all kinds of ores and other materials , especially applicable to adjusting particle size in the process of production machine- made sand.

 

2. Working principle of rod mill:

 

  1.  The rod mill is a horizontal rotating device transmitted by the outer gear.

 

   2. The materials are transferred to the grinding chamber through the quill shaft uniformly. There are ladder liner and ripple liner and different specifications of ceramic ball in the chamber.

 

   3. The centrifugal force caused by rotation of barrel brings the ceramic ball to a certain height and impact and grind the materials. The ground materials are discharged through the discharging board thus the grinding process is finished.

 

3. Main technical parameters:

 

Model	Feeding size(mm)	Discharging size(mm)	Weight of ball(t)	Rotational speed (r/min)	Power(kw)	Capacity(t/h)	Weight(t)
Φ900*1800	≤20	0.075-0.89	1.4	42	18.5	0.65-2	3.6
Φ900*2100	≤15	0.075-0.83	1.7	41	15	0.7-3.5	3.9
Φ900*3000	≤20	0.075-0.89	2.5	41	22	1.1-3.5	4.5
Φ1200*2400	≤25	0.075-0.6	3.5	36	30	1.5-4.7	11.5
Φ1200*2800	≤25	0.075-0.6	4.5	36	37	1.5-5	13
Φ1200*4500	≤25	0.075-0.4	5.5	32	55	1.6-5.8	13.8
Φ1500*3000	≤25	0.047-0.4	8.68	31	75	2-7	17
Φ1500*3500	≤25	0.047-0.4	7.75-6.4	31	75	3-8.5	17.5
Φ1500*4500	≤25	0.047-0.4	10.5	27	110	3.5-8	21
Φ1500*5700	≤25	0.047-0.4	15	27	130	3.5-10	24.7
Φ1830*3000	≤25	0.047-0.4	18	26	160	4-12	28
Φ1800*3600	≤25	0.047-0.4	10.6-11.35	26	160	5-13	33.5
Φ1830*4500	≤25	0.047-0.6	12	26.5	185	5.5-20	35
Φ1830*7000	≤25	0.047-0.4	25	26	210	6.5-22	36
Φ2100*3600	≤25	0.047-0.4	14-15.2	24	185	15-30	46.8

 

 

 

 

NOTICE:ANY CHANGE OF THE TECHNICIAL DATA SHALL NOT BE ADVISED ADDITIONALY.