Description | OS-3100G 100MHz digital readout oscilloscope |
Division line | 6inch screen with internal division lines: 8x10 divisions(1 division=1CM) |
Phosphor powder | P31 standard |
Accelerating voltage | 17KV |
Vertical deflection system |
Sensitivity | CH1 or CH2: 2mV/division to 5V/division +/-3% (11 steps) |
Frequency | DC-100MHz |
Rise time | 3.5ns |
Delay time | Rising edge observable |
Max. Input voltage | 400V (DC+AC peak value) when≤1KHz |
Input coupling | CH1, CH2, AC, DC, GND |
Display mode | CH1, CH2, CHOP, ALT, ADD, CH2 INV |
Polar selection | +/-(only CH2) |
X-Y operation | X axle and Y axle selection |
Sensitivity | X axle: CH1, CH2 2mV to 5V/div +/-3%,EXT: 0.1V/div |
Y axle: 2mV to 5V/division +/-3% |
Phase difference | ≤3%, DC-50KHz |
Bandwidth of X axle | DC-500KHz (-3dB) |
Horizontal reflection system |
Triggering mode | NORM , AUTO |
Sweep mode | Main scan, continuous delayed scan |
Triggering source | CH1, CH2, VERT, EXT |
TV trigger | External synchronous separation circuit |
Trigger level AUTO NORM | Adjustable range Automatically synchronized to trigger signal +/-4 divisions |
Slope | +/- |
Scan time | A: 50ns/division to 5s/division B: 50ns/division to 50s/division |
Accuracy | x1: 10ºC to 35ºC +/-3% ; 0ºC to 50ºC +/-4% x10: 10ºC to 35ºC +/-4% ; 0ºC to 50ºC +/-6% |
Scan expansion width | x10 |
Maximum scan | 50ns |
HOLD OFF time | Adjustable |
Delay time | 1us to 5s |
Readout time | Vertical axle: V/DIV, UNCAL, probe factor Scan speed: S/DIV, UNCAL, MAG |
Cursor readout function | ΔV, ΔT, Δ1/T |
Correction waveform | Frequency: 1KHz 20% Voltage: 0.5V 1% |
Power supply | 220V/110V +/-10%; 50/60Hz |
Dimensions | 450(W) x 150(H) x 310(D)mm |
Weight | 9kg |
Environmental Temperature | During operation: 0ºC to 40ºC Safe operation temperature: 10ºC to 35ºC Storage temperature: -20ºC to 70ºC |
Humidity | Measurement: 35-85%RH Storage: 45-85%RH |
Specifications subject to change for product improvement without prior notice |