Phone Repair 2in1 Vacuum Separator Machine For 14inch Screen

1) Model: TBK-968

2) Supply: AC100-240V

3) Power: 500W

4) Size: 240x370x120mm

5) Net Weight: 7.5KG

1) With the vacuum separator, you will not be worried about your damaged screen of mobile

    phonesor tablets. It helps to separate the LCD and glass and you have no need to replace

    the whole displaypart of your phones and tablets which can save money. Several buttons to

    operate, easy to use.

2) 2 kinds of vacuum separator for your choice: One is specially designed for separating

   damaged LCD screen of mobile phones. The other one is 2in1 separator which is both

   suitable for mobile phones and tablet screen separating.

3) Built-in vacuum pump, the screen is forced to attach to the machine firmly because of

    pressure difference, no additional holding clamp needed.

4) Automatic heating. With the thermostat you can set required temperature. Temperature is

    clearly displayed, convenient to read.

5) Low noise, stable performance, easy to operate.

6) The damaged screen is convenient to collect which is environment friendly.

7) Come with silicon pad to avoid air leak which ensures great vacuum effect.

8) Suitable for iPhone/Samsung/HTC phones and tablets.

1) Turn on the power switch;

2) Set the temperature to 80 celsius degree;

3) The temperature of the heated plate reaches 80 celsius degree 1-2 minutes later;

4) Put the silicon pad on the heated plate holes to holes.

5) Put the screen downwards to the holes of the heated plate.

6) Turn on the vacuum switch (2in1 separator: S1 for phones, S2 for tablets).

7) After the screen is sucked tightly, use the steel wire(not included) to separate the LCD and glass.

8) Remove the LCD and the separation process is finished.

Note:

If the screen is damaged badly, you can fix it with heat resistant tape(not included) before separating.