Product Details

68 degree 1/2" standard response chrome finished glass bulb fire sprinkler parts

Product description

1. Brief introduction:

Glass bulb fire sprinklers, which is the key part of automatic sprinkler sytem, can be used to not just detect fire risk but control the fire and extinguish it by automatically spraying water. Since it can meet the requirements of protection from fire risks at degrees, glass bulb sprinklers are generally used in high buildings, hotels, department stores, and warehouses, etc.

The environment temperature of working is not less than 4 ℃, and is not higher than 70 ℃.

2. Composition and structure:

Made of brass frame, splash, deflector, glass ball, seals, tight set screws.

3. Operating principle:

Spray Sprinklers serve a variety of applications but all operate individually when heat at the sprinkler is high enough to "automatically" operate a calibrated thermal link that opens the sprinkler allowing the pressurized water to spray onto the source of heat. If the first sprinkler cannot control the fire the heat will build and spread to adjacent sprinklers that will operate as needed. Although special situation/applications use sprinkler heads or nozzles that are already open such that water discharges through all the sprinklers at once, the normal "Wet" Pipe system limits the water flow to the area of high heat.

4. Technical parameters:

Sprinklers vary considerably in their water flow characteristic since they are each designed for certain applications, however their basic shapes are limited to Uprights, abbreviated SSU (vertical above pipe, spraying down), Pendants, abbreviated SSP (vertical, below pipe spraying down) and Sidewalls, Horizontal (abbreviated HSW) and Vertical (VSW), both spraying horizontally.

Technical parameters
Type	Nominal diameter(mm)	Connecting thread	Flow coefficient
T-ZSTP Conventional sprinkler	DN15	R1/2	80±4
T-ZSTP Conventional sprinkler	DN20	R3/4	115±6
T-ZSTX Pendent sprinkler	DN15	R1/2	80±4
T-ZSTX Pendent sprinkler	DN20	R3/4	115±6
T-ZSTZ Upright sprinkler	DN15	R1/2	80±4
T-ZSTZ Upright sprinkler	DN20	R3/4	115±6
T-ZSTBS Sidewall sprinkler	DN15	R1/2	80±4
T-ZSTBS Sidewall sprinkler	DN20	R3/4	115±6
ZSTDY Concealed sprinkler	DN15	R1/2	80±4
ZSTDY Concealed sprinkler	DN20	R3/4	115±6

Glass bulb technical parameters
Rated operating temperature	Max.ambient temperature	Glass bulb colour
57℃	27℃	Orange
68℃	38℃	Red
79℃	49℃	Yellow
93℃	63℃	Green
141℃	111℃	Blue
182℃	152℃	Purple

5. Product photo:

1. CCC/UL Listed fire sprinkler

Model: GW001 ZSTZ Style: Upright fire sprinkler Size: NPT/BSP R1/2" or R3/4" Material: Brass Plating: Chrome, Natural brass, White, or customized Working pressure: 1.2Mpa K-factor: 5.6/11.2 Operating temperature :57°C/68°C/79°C/93°C/141°C	Model:GW002 ZSTX Style: Pendent fire sprinkler Size: NPT/BSP R1/2" or R 3/4" Material: Brass Plating: Chrome, Natural brass, White, or customized Working pressure : 1.2Mpa K-factor: 5.6/11.2 Operating temperature :57°C/68°C/79°C/93°C/141° C	Model:GW003 ZSTBS Style: Sidewall fire sprinkler Size: NPT/BSP R1/2" or R 3/4" Material: Brass Plating: Chrome, Natural brass, White, or customized Working pressure : 1.2Mpa K-factor: 5.6/11.2 Operating temperature :57°C/68°C/79°C/93°C/141°
2. Viking type fire sprinkler

Model: VK001 Style: Upright fire sprinkler/SSU Size: NPT/BSP R1/2" or R3/4" Material: Natural brass Plating: Chrome, Natural brass, White, or customized Working pressure : 1.2Mpa K-factor: 5.6/11.2 Operating temperature : 57°C/68°C/79°C/93°C/141°C	Model: VK002 Style: Pendent fire sprinkler/SSP Size: NPT/BSP R1/2" or R3/4 Material: Brass Plating: Chrome, Natural brass, White, or customized Working pressure : 1.2Mpa K-factor: 5.6/11.2 Operating temperature :57°C/68°C/79°C/93°C/141° C	Model: VK003 Style:Sidewall fire sprinkler/HSW Size: NPT/BSP R1/2" or R3/4 Material: Brass Plating: Chrome, Natural brass, White, or customized Working pressure : 1.2Mpa K-factor: 5.6/11.2 Operating temperature : 57°C/68°C/79°C/93°C/141° C
4. GLOBE type fire sprinkler

Model: GL001 Style: Upright fire sprinkler/SSU Size: 1/2" Material:Brass Plating: Brass or Chrome Working pressure:1.2Mpa K-factor: 5.6 Working tempreature: 68℃	Model: GL002 Style: Pendent fire sprinkler/SSP Size: 1/2' Material: Brass Plating: Brass or Chrome Working pressure:1.2Mpa K-factor: 5.6 Working temperature: 68℃	Model: GL003 Style: Sidewall fire sprinkler Size: 1/2' Material: Brass Plating: Brass or Chrome Working pressure:1.2Mpa K-factor: 5.6 Working temperature: 68℃
3.Other products recommendation

FAQ

Q:Are you a factory or trading company?

We are a factory specialized in producing fire-fighting equipments.

Q: How could I visit your company?

We are located in 176 RIVER STREET UNITED LIANTANG NANAN CITY FUJIAN CHINA, about 1 hour from Guangzhou by air. We could take you up from Jinjiang or Xiamen airport.

Q: Could I get some samples?

Glad to offer the samples for free.

Q: Is OEM available?

Yes, we would try our best to meet your requirements.

Q: What's the term of payment?

T/T, L/C, West union, Paypal, Cash, etc.