Specifications

It possesses properties of good plasticizing,high output,low energy consumption,and clear layers splitting.

 

 

 

  

Features and application

     Monolayer plastic wide film blowing machine unit is mainly used for producing of LDPE,LLDPE,EVA,LDPE/LLDPE Blend.Its main structural characteristics are as follows:

      1.   The extruder adopts courgated screw with mixing head and foece transporting barrel ,and is configured with DC motor (or frequency control ).

      2.    The cooling system adopts air blower with low air pressure, and large air volume.

      3.    The haul-off system is stable and reliable.

      4.    It is supported by split device.

      5.    The inner cooling device can be matched by the requirement of users ( ordered separately)

 

      Multilayer co-extruding agricultural film ,geomembrane blowing machine unit is developed and designed on the basis of absorbing western advanced key technology.It is applicable for processing LLDPE,LDPE,EVA,mPE,HDPE materials.The structure is reasonable and the property is stable.It possesses properties of good plasticizing ,high output, low energy consumption, and clear layers splitting.It is ideal equipment for producing greenhouse film and geomembrane with multifunction of high strengh , ageing  resistance,no water drop,transmitting and heat presevation.

 

 

 

 

 multilayer technical parameters 

Model	3FM2800-I	3FM3500-I	3FM5000-IV	3FM5000-V	3FM5500-I	3FM5500-II
Max. width	10,000	12,000	14,000	16,000	18,000	20,000
Thickness	0.08~0.12
Composed layers	3
Applicable raw material	LDPE, LLDPE, EVA
Max. output	600	1,000	1,500	1,800	2,000	2,300
Extruder	90/30×2 120/25×1	120/25×2 150/30×1	150/30×3	150/30×2 180/30×1	180/30×3	180/30×3
Main driving power	90×2+110	110×2+200	250×3	250×2+280	280×3	315×3
Dia of neckling die	1,400	1,600	1,800	2,000	2,200	2,400
Outer dia. of air ring	3,600	3,600	Double tuyeres	Double tuyeres	Double tuyeres	Double tuyeres
Haul-off height	19,000	21,000	24,000	24,000	27,000	32,000
Wind-up speed	3~30
Edge folding form	Inserting plate
Wind-up method	Two position center wind-up machine
Total power of the unit	750	950	1,400	1,550	1,650	1,900
Overall dimension	16×9×20	18×12×21	19×11×25	20×13×25	20×15×27	22×22×3