Product Details

Large Volume 7200m3 Per Hour Cr Centrifugal Sludge Pump

Name: Large Volume 7200m3 Per Hour Centrifugal Gravel Sludge Pump
Brand: An Pump
Availability: InStock

PUMP Description

Overview about River Dredge Sand Pump

AMG sand pumps are designed for continuously handling the most difficult higher abrasive slurry which contain too big solids to be pumped by a common pump.

They are suitable for delivering slurry in mining, explosive sludge in metal smelting, dredging in dredger and course of rivers, and other fields. Type AMG sand pumps are of high-head ones.

Construction of sand pump is of single casing connected by means of clamp bans and wide wet-passage.

The wet-parts are made of Ni-hard and high chromium abrasion-resistance alloys.

The discharged direction of pump can be oriented in any direction of 360°.

This type of pump possesses the advantages of easy installing and operation, good performance of NPSH and abrasion-resistance.

Driver about River Dredge Sand Pump

Typies of driver: V belt driver, gearbox driver, elastic coupling driver, fluid couplings driver, frequency conversion driver, silicon controlled rectifier speed regulation etc.

Construction of River Dredge Sand Pump

Performance table list about River Dredge Sand Pump

Model	Outlet Dia (mm)	Speed (rpm)	Flow (m3/h)	Head (m)	Max Power (kw)	Max Solid (mm)
6/4D-AMG	100	600-1400	36-250	7-56	60	82
8/6E-AMG	150	800-1400	180-540	12-52	120	120
10/8F-AMG	200	500-1000	180-820	12-56	560	178
12/10G-AMG	250	400-850	360-1200	12-60	600	220
14/12G-AMG	300	300-700	700-2700	8-70	600	241
14/12TU-AMG	300	300-700	700-2700	8-70	1200	241
10/8F-AMGH	200	500-1100	50-900	20-90	560	180
12/10G-AMGH	250	350-700	500-2000	20-80	600	210
16/14TU-AMGH	350	250-500	1000-2800	20-80	1200	230

Packaging & Shipping

Pakcaging and shipping about River Dredge Sand Pump

FAQ

Attentions when connect the sand pump inlet and elbow directly

It will lead uneven distribution the fluid when from the elbow to impeller if connect the water pump inlet and elbow directly.

When the inlet diameter is greater than pump inlet should be installed eccentric adjustable tube.

The eccentric different-diameter pipe flat face should installed upper and the slopes under.

If not, the air will result increase the flow rate or can not suck the water and will have crashing noise.

If same for the diameters, should add a straight pipe between pump inlet and elbow.

The length can not shorter than twice or three times of pipe diameter.

Contact Info

7x24Hours Online Contact Information