EASY TO MAINTAIN

MCT(U) Series pumps are designed with ease of service in mind. Because they are self-priming. they can be mounted above the liquid being pumped. Should service or maintenance be required. It can be easily performed using common hand tools without disconnecting piping. The impeller, seal, wear plate and flap valve can all be accessed through the cover plate opening for inspection or service.

EXTERNAL SHIMLESS ADJUSTMENT DESIGN

Original flow, pressure and efficiency are maintained by simple external adjustment resulting in long-term energy and repair parts savings.

SUPERIOR SOLIDS HANDLING

Designed for economical, trouble-free operation, the superior solids handing capabilities of the MCT(U) Series pumps make them ideally suited for a variety of applications including solids-laden liquids allows automatic re-priming in a completely open system without the need for suction or discharge check valves.

PROTECTION OF BEARINGS

The air barrier along with a lip seal provide additional protection of bearings.  This unique design also allows external monitoring.

SUPERIOR SPHERICAL SOLIDS PASSING CAPABILITY

Available in discharge sizes of three, four, six, eight and ten inches, this line of self-priming pumps boasts capacities to 3400 gallons per minute(214.5 liters per second)and heads to 148 feet(45 meters).Pumps four inch and larger are engineered to allow up to three-inch diameter spherical solids to pass through any critical area, including the recirculation port.

CARTRIDGE SEAL

Exclusive double-floating, self-aligning, oil lubricated mechanical cartridge seal with stationary and rotating face of silicon carbide or tungsten titanium carbide is specifically designed for abrasive and or trash handing service.

SOLIDS-HANDLING IMPELLER

Two-vane, semi-open solids handling impeller handles up to 3”(75mm) diameter solids, depending on pump model. Pump out vanes on impeller shroud reduce foreign material buildup behind impeller and reduce pressure on seal and bearings.

REMOVABLE ROTATING ASSEMBLY

The entire rotating assembly can be removed without disturbing pump volute or piping. Pusher bolt holes are provided to assist with removable. A spare rotating assembly can be easily installed, resulting in less downtime.

EASILY REMOVABLE COVERPLATE

The removable cover plate with easy-grip handle and pusher bolt capability provides quick and easy access to the pump interior(Cover plate not available on 10”models).

MCT(U) SERIES PRODUCT PERFORMANCE CURVE

SERIES MCT(U)          MODEL MCT(U)-2

DATA SHEET

NET WEIGHT 92kg (203lbs)

SHIPPING WEIGHTS 114kg (252lbs)

IMPELLER DIA. 158,75mm (6.1/4”)

R.P.M. FROM 1150rpm TO 2900rpm

MAX. SOLIDS 44,45mm(1.3/4”)

SELF-PRIMING

1150 RPM 7,3m (24ft)     1450 RPM 7,6m (25ft)

1750 RPM 7,6m (25ft)     2050 RPM 7,6m (25ft)

2350 RPM 7,6m (25ft)     2650 RPM 7,6m (25ft)

2650 RPM 7,6m (25ft)     2900 RPM 7,6m (25ft)