china supplier Automatic garden pumps for water -Auto150

Cast iron pump body
Stainless steel mechanical
shaft seal (graphite to ceramic)

Brass impeller with radial peripheral blades
Superior steel or stainless steel shaft
With thermal protector for all single phase motor

Anti-rust design with brass fittings to prevent the rust from jamming the impeller (Optional)

Pump case with brass front cover are removable for easy maintenance

With plastic cover for waterproof.

• For handing clean water not contain abrasive particles
• For handing chemically non-aggressive fluids.
• For water supply and the automatic distribution of water from storage tanks
• For watering gardens
• For lifting water from tanks 
• For lifting water from well down to a depth of 8m.

Liquid temperature up to 40° C C

Ambient temperature up to 40°C

Suction lift up to 9 m

Two-pole induction c (n-2900 rpm)

Insulation Class B 
Protection IP44/IP54

This type pump is provided with a pressure tank and a pressure switch which controls starting and stopping the pump. When the pump discharge pressure increases to a setting point (e.g.1.7 bar), the switch cuts off, and the motor stops. At the same time compressed gas in the tank forces water out of tank, when the pressure decreases to a setting point(e.g. 1.1bar), the switch cuts in and the motor restarts. A new cycle begins.This makes pump operating in a setting region.