Product Details

FOR THIS ITEM: Cement suction and discharge hoses

Features of large diameter cement suction and discharge hose

1. It shows good capacity on bearing both positive pressure and negative pressure depending on high tensile nylon cord and helical wire built in the body.

2. The large diameter cement suction and discharge hose has favorable bending and tensile properties and it can work well under the vacuum degree of 60-80 Kpa with no flattening due to pumping and delamination but firm hose body.

3. The inner rubber lining of cement suction and discharge hose is abrasion resistant ,which can serve different media . the outer rubber cover is weather-resistant, anti-aging and whether-proof.

4. The surface of large diameter cement suction and discharge hose can be classified into corrugated surface, which can take stainless steel armouring. If customers need, various metal joints and assemblies can be prepared for the hose.

Application of suction and discharge hose

Large diameter cement suction and discharge hose is widely used for delivering abrasive or corrosive fluids such as cement,crude oil,water,sewage,slurries,petrochemicals and so on...

1)Hydraulic hose SAE standard/DIN EN standard:
SAE100R1AT/DIN EN 853 1SN
SAE100R2AT/DIN EN 853 2SN
SAE100R1A/DIN EN 853 1ST
SAE100R2A/DIN EN 853 2ST
SAE100 1SC
SAE100 2SC
SAE J517 100 R3 R4 R5 R6 R7 R8B R9 R12 R13 R14 R15 R16 R17
DIN EN 856 4SP
DIN EN 856 4SH,etc.

2)Industrial hoses:
Steam hose, twin welding hose, air hose, water hose, oil hose, sand blast hose, suction and discharge hose, ocean hose, metal hose, telflon(PTFE) hose
Fibre hose, PVC hose, drilling hose, expansion hose, LPG hose, fireproof hose, nylon resin tube, hose coupling,etc.

3)Other hoses:
Hydraulic/air brake hose(SAE J1401/J1402), air conditioning hose(R134A)
Power steering hose, car radiator hose

4)All kinds of hydraulic hoses/fittings/assembly:

Have any questions, please no hesitate to contact Kelly at any time!

Specifications:

Our main products covers high pressure hydraulic &penumatic hose, thermoplastic hose,oil hose ,air/steam hose, suction&discharge hose,etc.We also provide hydraulic hose assembly service.Besides China standards,We are capable of producing according to SAE/DIN&EN/ISO international standards as well as customized specification.We have ever cooperated with China large enterprises such as SINOPEC,CNOOC and StateGrid ,Depending on strict management system such as ISO9001 quality system,Mining products safety approval and close technical cooperation with China machinery R&D center ,we are capable of offering steady and reliable products as per customers's requirements .

Company information:

Hebei yifuan rubber technology Co., Ltd is attached to us as the exclusive manufacture of rubber products which is located in Hebei province. There are 180 workers including 8 senior engineers and 20 technicians. It outstands itself by advanced apparatus, powerful technology, and sound test methods. There are 50 sets of professional processing equipment, such as the braider, the twister, the plate vulcanizer, the non-rotor vulcanizer, etc.

Beijing Yihengtai Rubber Technology Co,.Ltd is a technical-oriented enterprise integrating R&D ,self-production and Ex factory sales which is located in No.2 Jinyuan Road, Economic Development Zone, Daxing District, Beijing . Our target is to explore the overseas market. There are about 20 staff in the company including 3 senior engineers and 8 technicians. It is attached to China National Machinery Research Institute as Machine Productivity Promotion Center Rubber Department in 2006.

During years of development, we have gained great achievement such as we have grasped the first-class rubber hose production technology by introducing both national and international advanced technology, established the strict quality assurance system and also acknowledged authorization of ISO9001. The rubber hoses made by us are widely used all over China and enjoy a great fame among users. All the technical norms of the products have reached the same level as international peers according to the test report by relevant institute.

We are competent to produce all kinds of rubber hoses including high pressure steel wire braided hose, high pressure steel wire spiraled hose, steel wire spiraled drilling hose, oceanic oil-conveying hose, fire -resistance rubber hose, engineering machinery hose& assembly,resin hose series, stainless steel metal hose,other rubber products and so on.

They have won lots of advantages over others such as high pressure resistance, high temperature resistance, strong flexibility, outstanding pulse performance, small deformation under pressure, and convenient to use and repair and therefore are widely applied in heavy industry like petroleum, coal, metallurgy, machinery, automobile manufacturing etc and also get applause from them. They are also popular among over 10 countries and areas like Russia, UK, France, Indonesia and so on.

Our aim is to serve for the users with heart and soul. We are specialized in producing and supply customized rubber hoses according to both domestic standard (national standards, industry standards, and enterprise standards) and international standards (DIN, SAE).

We sincerely hope we can establish kind, long-term cooperation with our current and potential customers from home and abroad in the future with our first-class after service and high quality products.

EXHIBITION:

FAQ:

1.What are your advantages?

We perfect every detail. We only supply high quality products, and a four-member professional team will be sincerely at your service anytime. All your problems would be solved very efficiently.

2. Are you a manufacturer or a distributor?

We are a manufacturer as well as a trading company, so we can ensure low price and high quality products, and also we could assist you purchase other products by virture of our excellent trading power.

3. Can you send us samples for testing?

Yes, samples in small quantity would be free of charge, but the freight should be paid in

advance or freight collect. Quality of the products you’ll purchase would be the same as that of samples.

4.What’s your payment terms?

T/T,L/C at sight. Western Union and Paypal are also available if it is convenient for you.

5.How about delivery time?

Within 3-7days for stock goods,10-20days for customized products after receiving the prepayment or relevant L/C.

6. How do you pack the products?

Hoses will be wrapped by plastic film and packed in woven bags, Pallets are available if it is necessary.

7.Can you print on the products as per our requests?

Yes, we could print images or words on the products, such as your logo ,brand etx,if you buy in bulk.

8. How to book rubber hose?
In order to book a suitable hose for your usage, we need the specific parameters about it including inside diameter, outside diameter, length of it, working pressure, flow capacity, the medium through it.

9.How long can it be used?

The warrant time varies by the working condition. In normal condition, it can reach 12 months.

10.Hose assembly service?
It's no problem for us to provide rubber hose assembly service, I.E .install hose coupling on rubber hose as per customer's requirements.

SAFE PACKAGE REFERENCE:

Precaution:

Precautions for Using Hose

The rubber hose has plenty varieties and structures, and the service conditions are different, so the service life of rubber hose does not only depend on its quality, but also the proper use and maintenance. Therefore, even though the product has high quality, if it could not be used and maintained properly, the use quality and service life would be affected badly, even undue serious may occur that causes loss of properties, several precautions for use are provided as follows:

(1)The rubber hose and rubber hose assemblies can only be used to convey the designed materials, or the service life may be decreases or they may fail to work.

(2)Properly use the length of rubber hose, for the length of rubber hose may be changed under high pressure (-4%-+2%) and by mechanical movements.

(3)The rubber hose and rubber hoses assemblies should not be used under the pressure higher than designed working pressure (including impact pressure).

(4)Under the normal circumstances, the temperature of medium conveyed by the rubber hose and rubber hose assemblies should not be out of the range of -40degree to 120degree, or the service life may be decreased.

(5)The rubber hose and rubber hose assemblies should not be used when smaller than minimum bending radius of rubber hose, bending or flex should be avoided near the joint, otherwise, the hydraulic hose transmission and material conveyance may be obstructed or the rubber hose composite member may be damaged.

(6)The rubber hose and rubber hose assemblies should not be used when they are twisted.

(7)The rubber hose and rubber hose assemblies should be carried carefully, no drag and drop on the sharp-edged and rough surfaces are allowed, and they should not be bended and flattened.

(8)The rubber hose and rubber hose assemblies should be kept clean and the interior should be flushed (especially the acid conveying rubber hose, spray hose and mortar hose).

Foreign bodies should be prevented from entering the hose so as not to obstruct fluid conveyance and damage the equipment.

(9)The rubber hose and rubber hose assemblies exceeding the service life or shelf life can only be used after being evaluated by test.

2. Precautions for Transport and Storage of Rubber Hose

(1)Transport of Rubber Hose

Attention should be paid to the following points when loading and unloading the rubber hose:

Load and unload the hose gently.

The hose should be shipped neatly by classification, excessive bending of the hose should be avoided and no other heavy object should be piled on the hose.

It is forbidden to mix the hose with acid, alkali, oil and organic solvent and inflammable and explosive items; the hose should not touch with and explosive items, the hose should not touch with the goods with sharp edge directly.

As for the hose needed to be transported straightly, in case that the length is longer than the carriage, the exceeding part should be supported by bracket so as to prevent the hose from damage due to dragging and rubbing against the ground.

If it is necessary to place the hose in the open air(or workshops and docks)temporarily, the site should be flat and level, the hose should be laid flat and neatly with the cushion on the ground and cover on the top. No heavy object is piled on the hose; and the hose should not touch with heat source.

When carrying the hose, no drag is allowed. As for the heavy hose, lifting appliance or special tools should be adopted, and accidental damage to the hose should be avoided.

(2)Storage of Hose

a. The storehouse for storing should be kept clean and ventilated, of which the relative humidity should be lower than 80% and the temperature inside should be kept within the range of-15degree to40degree.And the direct sunlight and leaching and drenching by snow and rain should be avoided.

b. When storing the hose, they should be placed separately in accordance with different varieties and specifications, and marked with nameplate so as to access easily.

c. The hose should be stored as loosely as possible, in general, the hose with the inner diameter of being smaller than 76mm could be coiled in storage (but the inner diameter of spool should not be less than 15times of that of hose).

d. In order to prevent deformation of hose due to squeeze in storage, the stacking should not be too high, and in general, the stacking should not be higher than1.5m;”stack transfer” of hose in storage is required and at least one stack transfer is required every quarter.

e. During storage of hose, the hose should not touch with the acid, alkali, oil and organic solvent or other corrosive liquid and gad and should be 1m far away from the heat source.

f. In general, the storage period of hose should not be more than two years. And the early stored hoses should be used first so as not to affect the quality of hose due to excessive storage period.

3. Precautions for Ordering

(1)Correctly select the variety, specification and model of rubber hose in accordance with the actual use requirements like temperature and concentration of conveyed mediums, and conditions like working pressure and use environment.

(2)The general rubber hose should be ordered in accordance with the product catalog.

(3)The pilot production and manufacture of rubber hose, of which the variety and specification are not listed in the catalog and there are special technology and performance requirement, could be conducted after negotiation between the both parties.

(4)The length of special rubber hose could be manufactured in accordance with customer’s requirements.

AND ALSO LOOKING FORWARD TO SEE YOU IN SOUTH KOREA FAIR IN OCTOBER!!!!