Product Details

BEST QUALITY POLYESTER STAPLE FIBER PRODUCTION PLANT

Product Description

1. Who we are : CISSCO MACHINERY CO., LTD

Cissco Machinery Co., has been engineering and manufacturing a series of EXTRUSION MACHINERY for more than 10 years and has thus acquired an extensive expertise in the supply of manufacturing machinery; having based ourselves on the features demanded by large companies in more than 30 countries.

2. General Introduction to PET STAPLE FIBER PRODUCTION PLANT

This production line can be used to produce polyester, polypropylene, polyamide and other staple fiber. Corresponding to technical equipment adjustment, it will be used to produce three-dimensional hollow fiber and other special chemical fiber.

The mainframe is diveded into two main parts, the prevenient filature and post filature.

3. Raw Material

4. Our Machinery process: BEST QUALITY POLYESTER STAPLE FIBER PRODUCTION PLANT

Two processes including:

4.1 fore spinning Line:
Vacuum Dryer -> Hopper -> Screw Extruder -> Filter -> Spin Beam (Meter Pump System, Spin Pack, Spinneret) -> Quenching Unit -> Interfloor Duct -> Draw-off Wall -> Capstan Roller -> Sunflower Gearing unit -> fiber can traverse system

4.2 after spinning Line:
if 2-Dimensional Hollow Fiber:
Can Creel -> Inlet Thread Guide -> Tow Guide Stand -> Dipping Bath -> 1st Draw Stand -> Draw Bath -> 2nd Draw Stand -> Draw Steam Chest -> 3rd Draw Stand -> Tow Stacker -> Crimper Steam Box -> Crimper -> Tow Conveyer -> Relaxer -> Tow Tension Stand -> Cutter -> Chain Plate Conveyor -> Baling Press

if 3-Dimensional Hollow Fiber:
Can Creel -> Inlet Thread Guide -> Tow Guide Stand -> Dipping Bath -> 1st Draw Stand -> Draw Bath -> 2nd Draw Stand -> Draw Steam Chest -> 3rd Draw Stand -> Tension Control Device -> Tow Stacker -> Crimper Steam Box -> Crimper -> Silicon Oil Sprayer -> Tow Tension Stand -> Cutter -> Fiber Spreader -> Fiber Leveler -> Relaxer -> Chain Plate Conveying system -> Baling Pressrecycled psf production line

5. Our process in Pictures

6. Layout , Configuration and Main parts of BEST QUALITY POLYESTER STAPLE FIBER PRODUCTION PLANT

Note : The above production line is standard , different customers have different requirements , however we adjust the entire line according to our clients productions requests.

our wide knowledge in the production of Staple fiber allow us to carefully evaluate each project's requirements, weigh the options and recommend the best solution for the client.

7. Our RECYCLED POLYESTER STAPLE FIBER / FINAL PRODUCT

Photo show

8. Location

Company Information

Our company is established in 1988, specialize in making extrusion equipment, thermoforming equipment and relevant facilities as well as moulds, and it is a limited reliability company which sets development, manufacture, sales and service in one.

We have strong research & development and manufacture ability, and it has a team consisting of professional staff from different engineering fields. Our factory is located in Zhejiang Province of China. We have a team of more than 100 empolyees.

Our machine is with advanced world levels, and its cost performance is incomparable all over the world. The company supplies foaming sheet units, which can produce foaming PE and PS sheet and board. The tandem-foaming machines is mainly making foaming PS sheet and board; Due to various advanced technology, the range foam expansion ratio is very wide and techniques is extremely stable. The single-foaming unit is mainly for PE sheet, and it is simply structured, which is easy for operation with reasonable price.

We are in the lead of thermoforming equipment industry. Its two-station electric thermoforming and trimming unit is set with 6 to 7 servo motors, which can save various kinds of parameters, and have high degree automation and speed. Its forming speed can reach 40 cycles per minute, trimming 160 cycles per minute, and it can process all kinds foaming material and hard

material. One-station thermoforming machine combines forming, punching, and stacking in one machine, which is equipped with 10 to 16 servo motors, and can memorize various kinds of processing parameters. Its forming speed can be 50 cycles per minute. And it can be applied to several kinds of hard material.

Meanwhile, We can provide customer relevant auxiliary parts and moulds, as well as turn-key project service

9. CONTACT INFORMATION :

Loyal Luo, Sales Export & Business Developer

CissCo Machinery Co., Ltd.

Mob.: +86 18817937157 I Office: +86 2138726398 / 99

Email: market02@ I Skype: cisscomachine03 I Web: