CE STANDARD PVC COIL MAT MAKING MACHINE, HIGH QUALITY PVC LOOP MAT PRODUCTION LINE
USD $100,000 - $100,000 /Set
Min.Order:1 Set
CE STANDARD PVC COIL MAT EXTRUSION LINE, PVC COIL DOOR MAT EXTRUSION LINE
Auto PSP Production LineFast Food Box Making MachineTAKE AWAY CONTAINER EXTRUSION MACHINERY
AUTO PSP LUNCH CONTAINER PRODUCTION MACHINE PS BURGER BOX MAKING MACHINE
AUTO PSP BURGER BOX EXTRUDING MACHINE PS LUNCH CONTAINER MAKING MACHINE
PVC DOUBLE-COLOUR COIL MAT MAKING LINE
No. | Name and Specification | Qty |
1 | Stirrer | 1 set |
2 | Stirring barrel (supply by customer) | 2 set |
3 | Colloid mill | 1 set |
4 | Colloid barrel (supply by customer) | 2 set |
5 | Manual hydraulic fork truck (1.5ton,supply by customer ) | 1 set |
6 | Peripheral tube,wire etc. (supply by customer) | / |
7 | Air, water, power (supply by customer) | / |
No. | Name and Specification | Qty |
1 | Vacuum loader (400kg/h) | 1 set |
2 | SJ120/25 single screw extruder | 1 set |
3 | Hydraulic screen changer D120 | 1 set |
4 | T-die PVC-1300 | 1 set |
5 | DIDA-YZ1300 vertical three roller calender | 1 set |
6 | DIDA-LQFT1300 cooling bracket and traction machine | 1 set |
7 | DIDA-DS1500 single position winder | 1 set |
8 | Guide rail | 9 m |
9 | Peripheral tube,wire etc. (supplied by customer) |
|
10 | Air, water, power (supplied by customer) |
|
No.1 Vacuum loader (400kg/h) | ||
No. | Items | Description |
1 | Power | 3.0kw |
2 | Feeding method | negative pressure ,can be controlled by time |
3 | Feeding capacity | 400kg/h |
4 | applicability | PVC granule |
No.2 PVC-DIDA-SJ120/25 Single screw extruder | ||
No. | Items | Description |
1 | Platform | Made of high quality profile steel |
2 | The gear box | Gears and the shaft: made of high-strength alloy Precision of the gear: Grade 6, GB10095-88 Hardness of the tooth face: HRC54~62 Speed-down ratio: i=20:1 Forced oil circulation system Adopt hard gear flank to grind gear |
3 | Screw and barrel | Material: 38CrMoA1A Depth of nitride: 0.3~0.6mm Hardness of nitride: 850HV Diameter of Screw: 120mm L/D ratio of screw: 25:1 |
4 | Heating zone | Power : 3~AC 380V, 50 Hz , star connection. Inner diameter of the heater: D180mm |
5 | Cooling system | Cooling way: By air No. of Blower:6groups |
6 | The main motor | Power: 90kw The max. rotate speed: 1500rpm |
7 | Flange of Barrel | Material: forged steel 45#, finely machined Surface: Blackening treated |
8 | Speed regulator | AC frequency transformer , Power: 90kw |
9 | Temperature Controller | No: 16 groups Brand: RKC (Japanese). Temperature measured by Platinum resistance (Pt 100) |
10 | Electrical cabinet | Vertical style |
11 | Electrical tank | The surface is treated by plastic for fastness and endurance |
12 | electricity | `3~AC380V, 50Hz |
No.3 Hydraulic screen changer 120 | ||
No. | Items | Description |
1 | Model | 120mm |
2 | Hydraulic station | Typical accumulator loop, it is good for working at high pressure and large flow rate condition Working pressure: P max=80kg/cm2 P min=65kg/cm2 Pressure of accumulator: P=50kg/cm2 The capacity of oil pump: 4cm3/rev Motor power :1.1kw |
No.4 T-Die PVC 1300 | ||
No. | Items | Description |
1 | Available Width of mould | 1220mm |
2 | The most opening | 3mm |
3 | The least opening | 0.5mm |
2 | Mould material | Adopts the high grade refined alloy-steel |
3 | Heating power | 3kw/area |
DIDA-YZ1300 Vertical three roller calender | ||
No. | Items | Description |
1 | Feeding method | Feed between middle and upper rollers |
2 | Linear speed | Max.: 12m/min |
3 | Configuration of this unit | framework Gearbox rollers distance-adjusted device for roller moving units hydraulic control system cooling, haul-off and side-cutting device electric control box |
4 | Framework | Material: made of profile steel |
5 | Gearbox | Skew gear Driven power: 2.2 kw/roller |
6 | Rollers | Diameters: D 360mm Water Inlet/outlet: 1-1/4” |
7 | Interval adjusting device | limited adjustment The space among the rollers is held by hydraulic system, the pressure is stable and reliable |
8 | Moving Units | Motor power: 0.37Kw The whole moving mould is made up of driven system,jack units etc. |
9 | Hydraulic control system | The main function of this unit is to hold the distance of two rollers, shaping the plastic sheet under a certain pressure to make sure its smoothness and uniform |
10 | Electric control box | AC frequency transformer, The rollers can be adjusted either as a whole, or individually for mini-adjusting |
DIDA-DS1300 Single position winder machine | ||
No. | Items | Description |
1 | Winder way | Central Winder |
2 | Winding diameter | Max: 550mm |
3 | Gaseous distention axis | 1300mm |
4 | Length measuring system | Measuring the length by the coder |
5 | Electric control tank | Relay loop |
|
|
|
PICTURES
• We design, engineer and manufacture and customized the extrusion line.
• Choosing the right solution: In plastics manufacturing, process is everything. We carefully evaluate each project's requirements, weigh the options and recommend the best solution for the client.
• Training & Development: we offer extensive start-up assistance, comprehensive training. As well as Engineers for training and installation at our client’s factory
• Support: We support the client in all the stages of the project life cycle, as well as the constant spare parts supply in a time efficient manner.