Professional manufacturer supplier cheap sample concentration price
USD $600 - $700 /Set
Min.Order:1 Set
Taizhou Biomaker Scientific Instrument Co., Ltd.
liquid nitrogen concentrator price instrument with good quality
Product description: BS-NDK200-1 nitrogen concentrator is mainly used for enrichment of large-volume sample or preparation (such as drug screening, hormone analysis, liquid phase, and mass spectrometry in the analysis of sample preparation). Working principle: the nitrogen into the heated surface of the sample and make the solvent t evaporate and separated rapidly, thereby reaching the sample enrichment purpose without oxygen, keep the sample purer. Nitrogen concentrator instrument can concentrated dozens of samples simultaneously, saving time and high efficient, instead of rotary evaporation instrument.
Product features
1. Synchronously working with heating by dry bath in the bottom and nitrogen blowing on the surface accelerates liquid evaporation and sample concentration.
2. The position of gas needle in air cavity can be adjusted to suit for different types of tubes.
3. The height of the air cavity can be adjusted. The length of a standard gas needle is 150mm.
4. Gas needle is controlled independently. Separately blow of each needle and flow regulating of each needle are available to avoid gas waste.
5. The entire equipment can be put into ventilation cabinet when the concentration sample in toxic solvents.
6. Built in overheat protection, automatic fault detection and fault beep alarm devices.
7. LED display immediate temperature and diminishing time. Operation is simple and convenient.
8. Standard configured air cavity and adjustable bracket.
Model | BS-NDK200-1 nitrogen concentrator | BS-NDK200-2 nitrogen concentrator |
Temperature range | RT+5℃ to 150℃ | |
Heating time | ≤30min (from 40℃ to 150℃) | |
Temperature accuracy(40~100℃) | ±0.5℃ | |
Temperature accuracy(100~150℃) | ±1℃ | |
Temperature uniformity(100℃) | ±0.5℃ | |
Blocks Quantity | 1 pieces | 2 pieces |
Time range | 99h59min | |
Nitrogen flow | 0—10L/min | |
Nitrogen pressure | ≤0.1MPa | |
power | 200W | 400W |
Dimensions | 230x200x500 mm | 260x220x500 mm |
Blocks Selection | Refer to the “ Exchangeable blocks for BS-NDK Series” |
Optional blocks from BS-DT01A to BS-DT18. Block can be interchanged easily.Optional flow regulating valve.
Type | Description |
| ||
BS-DT01A | Φ6 mm x 12 | 95.5 x 76.5 x 50 | ||
BS-DT02A | Φ7 mm x 12 | 95.5 x 76.5 x 50 | ||
BS-DT03A | Φ10 mm x 12 | 95.5 x 76.5 x 50 | ||
BS-DT04A | Φ12 mm x 12 | 95.5 x 76.5 x 50 | ||
BS-DT05A | Φ13 mm x 12 | 95.5 x 76.5 x 50 | ||
BS-DT06A | Φ15 mm x 12 | 95.5 x 76.5 x 50 | ||
BS-DT07A | Φ16 mm x 12 | 95.5 x 76.5 x 50 | ||
BS-DT08A | Φ19 mm x 12 | 95.5 x 76.5 x 50 | ||
BS-DT09A | Φ20 mm x 12 | 95.5 x 76.5 x 50 | ||
BS-DT10A | Φ26 mm x 12 | 95.5 x 76.5 x 50 | ||
BS-DT11A | Φ28 mm x 12 | 95.5 x 76.5 x 50 | ||
BS-DT12A | Φ40 mm x 12 | 95.5 x 76.5 x 50 | ||
BS-DT13A | 0.5ml centrifugal tube x 12 | 95.5 x 76.5 x 50 | ||
BS-DT14A | 1.5ml centrifugal tube x 12 | 95.5 x 76.5 x 50 | ||
BS-DT15A | 2.0ml centrifugal tube x 12 | 95.5 x 76.5 x 50 | ||
BS-DT16A | 0.2ml tube x 12 | 95.5 x 76.5 x 50 | ||
BS-DT17A | Flat (96-hole Enzyme Plate) | 78 x 114 x 26 | ||
BS-DT18A | customized | customized |
Q: What after-sales service can be provided by BIOMAKER ?
A: The after-sales service of BIOMAKER is divided into two parts: technical support and maintenance.
Q: What about the technical support and maintenence?
A: Sometimes users will get some problems when they operate the instruments which are unfamiliar or first time use, users can send us emails or call us about detailed information. We will provide users solution or operation video.
For so many years’ experience, our instruments works well during warranty period. If there any parts are broken during warranty period, we would like to provide spare parts for free.