Master Touch-Q series deionized water purification system With 5.0 inch touch screen system
USD $1,000 - $4,000 /Piece
Min.Order:1 Piece
Shanghai Drawell Scientific Instrument Co., Ltd.
Edi-S10UF Lab Eliminating endotoxin ultrapure water pure system (Tap water inlet)
Edi-S10UVF Synthesizing ultrapure water pure system (Tap water inlet)
ECO-S15 Basic ultrapure water system (Tap water inlet) with single stage RO water/ultrapure water
ECO-Q15UT laboratory deionized water system purifier with high quality
Master Touch-Q series deionized water system (Tap water inlet)
Model | Master Touch-Q15 | Master Touch-Q15UT | Master Touch-Q30 | Master Touch-Q30UT |
Output(25℃)* | 15 liters/hour | 30 liters/hour | ||
Flow rate | Up to 2 liters/minute (with pressure tank) | |||
Pure water outlet | 2: reverse osmosis water, deionized water | |||
Deionized water quality |
|
|
|
|
Resistivity | 16-18.2MΩ.cm | |||
Bacteria | N/A | <0.1cfu/ml | N/A | <0.1cfu/ml |
Particle(>0.1μm) | N/A | <1/ml | N/A | <1/ml |
RO water quality |
|
|
|
|
Ion rejection rate | 96%-99% (new RO membrane) | |||
Organic rejection rate | >99%, when MW>200 Dalton | |||
Particles and bacteria rejection rate | >99% | |||
Feed water requirements | Tap water, temperature:5-45℃,pressure:1.0-4.0Kgf/cm2 | |||
Dimension and weight | Length×Width×Height:500×360×540mm / Weight: about 20Kg | |||
Electrical requirements | AC110-240V, 50/60Hz | |||
Power | 120W | |||
Standard configuration | Main body (Including 1 set of cartridge)+15 liters pressure tank |
Remarks:
*The value will be influenced by temperature and feed water’s quality.
Drawell After Sales Service-----Please don't worry, our products are superior in quality, If you have any problems, please feel free to let us know, we are glad to support as below:
* Good quality firstly to avoid any defective products ;
* Operation Manuals in English ; installation & operation vedio will be provided to you as guidance ;
* We could provide Online instruction ;
* During warranty time, we can send product accessories when you need;
* Your technicians can come to our factory for training , Drawell engineers can go your place for support ( cost on your side );
* Products can be customized according to your requirements;
* Generaly the machine can use 5~10 years for average even longer if you use properly.