Hydro Generator Small Water Turbines Hydroelectricity Turbine
Turgo turbine
Turgo turbine is a type of Impulse turbine need less water head than Pelton turbine, transfers
the water dynamic energy through the nozzle, impact on the Turgo runner, and then drive the generator transfer to electrical energy. The main different between Turgo turbine and Pelton turbine is the angle of runner center line and jet center line.Turgo turbine suit to 30-400meter water head, and water flow 30L /s -2000L/s, and output range from 10Kw to 3200Kw; runner diameter form 32cm to 80cm. Turgo turbine designed as horizontal simple structure, less investment, high efficiency, and reliable long service life.
1,Suitable water head : 30-400m
2, Output scope : 10Kw -3200Kw
3, Runner diameter : 32cm -800cm
4,Runner material :cast or welded stainless steel
5, Arrangement type : Horizontal
6, Nozzle numbers : 1-2
Technical Parameter of 0.6~5KW Turgo Turbine
Model | Power (kW) | Water head (m) | Flow Rate (m3/s) | Speed (r/min) | Diameter (mm) | Excitation Mode |
CT13-L-10/1x2 | 0.3 | 5-15 | 0.007-0.01 | 500-1500 | 80 | permanent magnet |
CT13-L-10/1x2 | 0.5 | 7-15 | 0.007-0.011 | 500-1500 | 80 | |
CT13-L-10/1x2 | 0.6 | 9-18 | 0.008-0.01 | 500-1500 | 80 | |
CT13-L-12/1x2.8 | 1 | 10-25 | 0.008-0.01 | 500-1500 | 90 | |
CT13-L-12/1x2.8 | 1.5 | 12-28 | 0.008-0.015 | 500-1500 | 90 | |
CT13-L-13/1x2.8 | 2 | 15-30 | 0.01-0.015 | 500-1500 | 100 | |
CT13-L-13/1x3 | 3 | 18-30 | 0.015-0.02 | 500-1500 | 100 | |
CT13-L-18/1x5 | 5 | 20-40 | 0.015-0.25 | 500-1500 | 150 | |
CT13-L-18/1x5 | 5 | 30-35 | 0.015-0.25 | 1500 | 150 | excitation |
Advantage:
1. Low MOQ: It can meet your promotional business very well.
2. OEM Accepted: We can produce any your design.
3. Good Service: We treat clients as friend.
4. Good Quality: We have strict quality control system .Good reputation in the market.
5. Fast & Cheap Delivery: We have big discount from forwarder (Long Contract).
Check below for more information on placing an order
1. Inquiry-Professional quotation. |
2. Confirm the price, lead time, artwork, payment term etc. |
3. Freedom sales send the Pro forma Invoice with freedom seal. |
4. Customer make the payment for deposit and send us Bank receipt. |
5. Initial Production Stage-Inform the clients that we have got the payment, and will make the samples according to your request, send you photos or Samples to get your approval. After approval, we inform that we will arrange the production & inform the estimated time. |
6. Middle Production-send photos to show the production line which you can see your products in . Confirm the estimated delivery time again. |
7. End Production-Mass production products photos and samples will send to you for approval. You can also arrange the third party Inspection. |
8. Clients make payment for balance and Freedom Ship the goods .Also can accept payment term-Balance against B/L Copy Or L/C payment Term. Inform the tracking number and check the status for clients. |
9. Order can be say “finish” when you receive the goods and satisfy with them. |
10. Feedback to Freedom about Quality, Service, Market Feedback & Suggestion. And we can do better. |
We adopt standrad exporting package,use environmental protection materials to makesure the package is suitable to long distance transportation.
Our customers have a wider range of processing choices for transportation mode:
By Express ( FedEx, UPS, DHL, TNT, EMS, etc... )
--- Advantage: Fast ( takes about 7 - 10 days in the delivery ), door to door
--- Disadvantage: A little expensive
By Air Transportation
--- Advantage: Fast ( takes about 8 - 12 days ), a little cheaper than Express.
--- Disadvantage: You need to take the goods from the airport by yourself.
By Sea ( Ocean ) Transportation
--- Advantage: Much cheaper than Express or Air transportation.
--- Disadvantage: Slow and you need to take the goods from your destination port by yourself.