High quality charcoal powder briquette machine for sale

1.Charcoal powder briquette machine product introduction

1) Coal bar machine is mianly use to making man-made charcoal from coal powder.

2) The motor transmits power to transmission through the V-belt. 

3) The transmission output shaft transmits power to propeller through the floating coupling, and the thruster of propeller push forward coal through forming die to produce the ideal high-pressure coal-stick.

Coal bar machine is the core equipment of charcoal machinery. It can press bamboo, wood, shells, straw (besides stalk and wheat straw) and other waste powdery materials that the moisture less than 12% into various shapes solid briquettes with center hole by high temperature and high pressure, and no need any binders.

Installation & maintain of charcoal powder briquette machine:

1. All the part should be cleaned and checked before installation.

2. Install the machines on the level ground, and better on the concrete floor.

3. Before trying the machine, you have to add oil into the lubricant parts.

4. Check whether there is loosen parts, if yes, tight it directly. 

5. Inching the machine, and see whether there are clutters and unnormal sounds. If there is no, we can start the machine completely.

6. Driving the machine to run it without any material in for about 3-5 minutes, after make sure the machine works normal and good, we can put the materials in it for production.

7. If the feed opening apperas blocking, use a wooden stick to unclock, and mustn't use the metal of steel stick.

8. Add the oil for the transmission and rotating parts regularly. The temperature of bearing parts shold be less than 60 celsius degree.

9. Stop feeding the materials and make sure there is no any material in the cylinder before stopping the mahcine. Remove the machine head, clean it and theninstall it for next time using.

Features of charcoal powder briquette machine:

1.Our charcoal machine absorbs the advanced technique at home and abroad.

2.Innovative design and reliable quality.

3.Key parts are processed by imported high quality materials.

4.High strength and toughness.

5.Temperature  control, durability, adaptability.

6.High production capacity.

7.Besides the normal products, we can also design and manufacture special moulds as the customers’ requirements. 

8.The customers can purchase complete machine with other kind of moulds, then the machine can be multipurpose, and the customers can save capitals.

Working site

Final product

Our service

(1) Design for production line flow and equipment layout freely according to the site.

(2) Supply the foundation drawing of equipment.

(3) Supply the technical parameters of peripheral equipment.

(4) During the operation, we can offer the technology service freely if the user needs to adjust the layout and application.

(5) During the operation, we only collect the cost if the user willing to upgrade the equipment when we have the advantage technology.

Our company

Gongyi city Yuxiang Heavy Machinery Co,Ltd has established more than 20 years, which is a professional manufacturer and exporter that is concerned with R&D, production, sales and service. In the past 20 years, our mainly product Mining series equipment, Charcoal briquette machine series, Carbonization furnace equipment, Dryer series equipment, Grinding machine series,feed and fuel pellet making machine ,oil press machine etc. We are located in Gongyi city, Henan, China.